TPS54620
www.ti.com
SLVS949C –MAY 2009–REVISED MAY 2011
4.5V to 17V Input, 6A Synchronous Step Down SWIFT™ Converter
Check for Samples: TPS54620
1
FEATURES
•
•
•
Adjustable Input Undervoltage Lockout
Supported by SwitcherPro™ Software Tool
•
•
•
•
•
•
•
•
Integrated 26mΩ / 19mΩ MOSFETs
For SWIFT™ Documentation and
SwitcherPro™, visit http://www.ti.com/swift
Split Power Rail: 1.6V to 17V on PVIN
200kHz to 1.6MHz Switching Frequency
Synchronizes to External Clock
APPLICATIONS
0.8V ±1% Voltage Reference Over Temperature
Low 2uA Shutdown Quiescent Current
Monotonic Start-Up into Pre-biased Outputs
•
•
•
High Density Distributed Power Systems
High Performance Point of Load Regulation
Broadband, Networking and Optical
Communications Infrastructure
–40°C to 150°C Operating Junction
Temperature Range
•
•
Adjustable Slow Start/Power Sequencing
Power Good Output Monitor for Undervoltage
and Overvoltage
DESCRIPTION
The TPS54620 in thermally enhanced 3.5mm x 3.5mm QFN package is a full featured 17V, 6A synchronous step
down converter which is optimized for small designs through high efficiency and integrating the high-side and
low-side MOSFETs. Further space savings are achieved through current mode control, which reduces
component count, and by selecting a high switching frequency, reducing the inductor's footprint.
The output voltage startup ramp is controlled by the SS/TR pin which allows operation as either a stand alone
power supply or in tracking situations. Power sequencing is also possible by correctly configuring the enable and
the open drain power good pins.
Cycle by cycle current limiting on the high-side FET protects the device in overload situations and is enhanced
by a low-side sourcing current limit which prevents current runaway. There is also a low-side sinking current limit
which turns off the low-side MOSFET to prevent excessive reverse current. Thermal shutdown disables the part
when die temperature exceeds thermal shutdown temperature.
WHITE SPACE
SIMPLIFIED SCHEMATIC
100
8 V
PVIN
VIN
VIN
95
Cboot
TPS54620
BOOT
90
85
Cin
17 V
12 V
VOUT
Lo
80
75
70
EN
PH
Co
PWRGD
R1
VSENSE
SS/TR
65
60
R2
RT/CLK
COMP
VOUT = 3.3 V
Fsw = 480 kHz
GND
R3
C1
Exposed
Thermal
Pad
55
50
Css
Rrt C2
0
1
2
3
4
5
6
Load Current - A
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2009–2011, Texas Instruments Incorporated