TPS54622
www.ti.com
SLVSA70 –MARCH 2011
4.5V to 17V Input, 6A Synchronous Step Down SWIFT™ Converter With Hiccup
Check for Samples: TPS54622
1
FEATURES
and Overvoltage
•
•
•
Adjustable Input Undervoltage Lockout
•
•
•
•
•
•
•
•
Integrated 26mΩ / 19mΩ MOSFETs
Supported by SwitcherPro™ Software Tool
Split Power Rail: 1.6V to 17V on PVIN
200kHz to 1.6MHz Switching Frequency
Synchronizes to External Clock
For SWIFT™ Documentation and
SwitcherPro™, visit http://www.ti.com/swift
0.6V ±1% Voltage Reference Over Temperature
Low 2uA Shutdown Quiescent Current
Monotonic Start-Up into Pre-biased Outputs
APPLICATIONS
•
•
•
High Density Distributed Power Systems
High Performance Point of Load Regulation
–40°C to 150°C Operating Junction
Temperature Range
Broadband, Networking and Optical
Communications Infrastructure
•
•
Adjustable Slow Start/Power Sequencing
Power Good Output Monitor for Undervoltage
DESCRIPTION
The TPS54622 in thermally enhanced 3.5mm x 3.5mm QFN package is a full featured 17V, 6A synchronous step
down converter which is optimized for small designs through high efficiency and integrating the high-side and
low-side MOSFETs. Further space savings are achieved through current mode control, which reduces
component count, and by selecting a high switching frequency, reducing the inductor's footprint.
The output voltage startup ramp is controlled by the SS/TR pin which allows operation as either a stand alone
power supply or in tracking situations. Power sequencing is also possible by correctly configuring the enable and
the open drain power good pins.
Cycle by cycle current limiting on the high-side FET protects the device in overload situations and is enhanced
by a low-side sourcing current limit which prevents current runaway. There is also a low-side sinking current limit
which turns off the low-side MOSFET to prevent excessive reverse current. Hiccup protection will be triggered if
the overcurrent condition has persisted for longer than the preset time. Thermal hiccup protection disables the
device when the die temperature exceeds the thermal shutdown temperature and enables the part again after
the built-in thermal shutdown hiccup time.
WHITE SPACE
SIMPLIFIED SCHEMATIC
100
PVIN
VIN
VIN
95
90
Cboot
TPS54622
BOOT
Cin
85
80
75
70
65
60
55
50
VIN = 8 V
VIN = 12 V
VOUT
Lo
EN
PH
VIN = 17 V
Co
PWRGD
R1
VSENSE
SS/TR
R2
RT/CLK
COMP
GND
R3
C1
0
1
2
3
4
5
6
Exposed
Thermal
Pad
Css
Rrt C2
Output Current - A
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2011, Texas Instruments Incorporated