TPS2074, TPS2075
FOUR-PORT USB HUB POWER CONTROLLERS
SLVS288A – SEPTEMBER 2000 – REVISED FEBRUARY 2001
DB PACKAGE
(TOP VIEW)
Complete USB Hub Power Solution
Meets USB Specifications 1.1 and 2.0
PG_DLY
EN1
BP_DIS
BP
Independent Thermal and Short-Circuit
Protection
1
24
23
22
21
20
19
18
17
16
15
14
2
AGND
PG
OUT1
OUT2
OUT3
OUT4
OC4
3
3.3-V Regulator for USB Hub Controller
Overcurrent Logic Outputs
4
SP
5
4.5-V to 5.5-V Operating Range
SP
6
CMOS- and TTL-Compatible Enable Inputs
185 µA Bus-Power Supply Current
Available in 24-Pin SSOP Package
–40°C to 85°C Ambient Temperature Range
NC
7
3.3V_OUT
OC3
8
†
BPMODE
OC2
9
DP0_RST
EN2
OC1
10
11
EN4
DGND 12
13 EN3
description
NC – No internal connection
The TPS2074 and TPS2075 provide a complete
USB hub power solution by incorporating three
major functions: current-limited power switches
for four ports, a 3.3-V 100-mA regulator, and a
DP0linecontroltosignalattach/detachofthehub.
†
Pin 9 is active low (BPMODE) forTPS2074
and active high (BPMODE) for TPS2075.
‡
simplified hybrid-hub diagram
D+
D–
These devices are designed to meet bus-pow-
ered and self-powered hub requirements. These
devices are also designed for hybrid hub
implementations and allow for automatic switch-
ing from self-powered mode to bus-powered
mode if loss of self-power is experienced. This
feature can be disabled by applying a logic high to
the BP_DIS input
Power
OUT1
SP
5 V
Supply
GND
OUT2
TPS2074
D+
D–
OUT3
DP0_RST
5 V
OUT4
BP
GND
3.3 V_OUT
BPMODE
1.5
kΩ
Downstream
Ports
D+
D–
Each port has a current-limited 100-mΩ N-
channel MOSFET high-side power switch for
500 mA self-powered operation. Each port also
has a current-limited 500-mΩ N-channel MOS-
FET high-side power switch for 100-mA bus-
powered operation. All the N-channel MOSFETs
are designed without parasitic diodes, preventing
current backflow into the inputs.
Upstream
Port
V
EN OC
DP1
DM1
CC
5 V
DP2
DM2
DP3
DM3
DP4
DM4
GND
DP0
DM0
D+
D–
5 V
Hub
Controller
D+
D–
GND
5 V
GND
‡
See Figure 33 for complete implementation.
For applications where a 5-V regulator is needed,
use the TPS2070 or TPS2071 device.
SELECTION GUIDE
PACKAGED DEVICES
T
USB HUB POWER CONTROLLERS
A
†
PIN COUNT
BPMODE
HTSSOP (DAP)
TPS2070DAP
TPS2071DAP
—
SSOP (DB)
Active low
Active high
Active low
Active high
—
—
Four-port with internal LDO controller
Four-port without internal LDO controller
32
24
–40°C to 85°C
TPS2074DB
TPS2075DB
—
†
The DB package is available taped and reeled. Add an R suffix to the device type (e.g., TPS2074DBR).
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 2001, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265