TPA150 Series
150 Watts Multiple Outputs PowerAdapters
FEATURES
• IEC 320/C14 AC Inlet
• Optional On/Off Switch
• Optional +5V/2A Standby Power
• Built-in Cooling Fan with Speed Control
• Compliant with RoHS Requirements
INPUT SPECIFICATIONS
MODELS LIST
Input Voltage Range ............ 90~264 VAC
Input Frequency ................... 47~63Hz
Input Current ........................ 2A rms @ 90 VAC;
1A rms @ 264 VAC
Inrush Current ..................... 25A max. @ 115 VAC at 25 C;
............................................. 50A max. @ 230 VAC at 25 C
Output Rating
Product No.
TPA150-D21
TPA150-D25
TPA150-D26
Max. Power Ripple & Noise*
Voltage
+5V
Max. Current
15A
8A
°
°
50mV
150W
+12V
+5V
120mV
Power Factor ....................... 0.95 min. @ 115 VAC
0.90 min. @ 230 VAC
15A
5A
50mV
150W
+19V
+12V
-12V
+5V
190mV
OUTPUT SPECIFICATIONS
12A
1.5A
15A
8A
120mV
150W
Output Power ....................... 150W max.
Output Voltage ..................... See table
Output Current ..................... See table
Output Regulation ............... ±5%
Ripple and Noise* .............. See table
Hold-up Time....................... 10ms max. typical @ 115 VAC
Overvoltage Protection ........ Auto-recovery; Shutdown if +5Vsb
power exists
120mV
50mV
TPA150-T31
TPA150-Q40
+12V
-12V
+3.3V
+5V
150W
150W
120mV
120mV
50mV
1.5A
6A
7A
50mV
Overload Protection ............ Auto-recovery; Shutdown if +5Vsb
power exists
+12V
-12V
8A
120mV
120mV
Short Circuit Protection........ Auto-recovery; Shutdown if +5Vsb
1.5A
power exists
Notes:
* Ripple & Noise is maximum peak-to-peak voltage value measured at output
within 20MHz bandwidth, at rated line voltage and output load ranges, and with a
10µF electrolytic capacitor in parallel with a 0.1µF ceramic capacitor across the
output connector.
1) Add suffix “-V” to the P/N when ordering units with +5V/2A standby power.
2) Add suffix “-S” to theP/N when ordering units with on/off switch.
3) Other outputs available upon request.
GENERAL SPECIFICATIONS
STANDARDS & COMPLIANCES
Efficiency ............................. 80% min. @ full load, 115VAC
Switching Frequency........... 50KHz
EMC Standards ..............FCC/CISPR22/CE/EN 55022 Class B
Safety Standards ............UL 60950-1, EN/IEC 60950-1,
CSA C22.2 No.60950-1
AgencyApprovals ...........UL, cUL, TUV, FCC, CB, CE
Other Compliance ..........RoHS
°
°
Operating Temperature ...... 0 C to +70 C
°
°
Storage Temperature .......... -10 C to +70 C
Operating Humidity ............. 20%~90% non-condensing
°
Derating............................... Derate linearly 2.5% per C, from
°
°
51 Cto 70 C
Withstand Voltage ............... 4,242VDC input to output ;
............................................. 2,121VDC input to ground
MTBF .................................... 100K hours min. @ full load, 25 C
ambient, calculated per
°
MIL-HDBK-217F
Tumbler Technologies + TRUMPower
3350 Scott Blvd., Building 13 • Santa Clara, California 95054, USA • 408-988-6616 • sales@trumpower.com • www.TRUMPower.com