TMP93CF76/CF77/CW76/CU76/CT76
CMOS 16-Bit Microcontroller
TMP93CF76/CF77/CW76/CU76/CT76
1. Outline and Feature
TMP93CF76/CF77/CW76/CU76/CT76 are
a high-speed advanced 16-bit microcontroller
developed for application with VCR system control, software servo motor control, VFT driver and
timer control.
In addition to basics such as I/O ports, the TMP93CF76/CF77/CW76/CU76/CT76 have high-
speed/high-precision signal measuring circuit, PWM (Pulse-Width-Modulator) and high-precision
real timing pulse generator.
The device characteristics are as follows:
(1) Original 16-bit CPU (900/L CPU)
•
•
•
•
•
TLCS-90 instruction mnemonic upward compatible
16 Mbyte linear address space
General-purpose registers and register bank system
16-bit multiplication/division and bit transfer/arithmetic instructions
High-speed micro DMA: 4 channels (2 µs/2 byte at 16 MHz)
(2) Minimum instruction execution time: 250 ns at 16 MHz
(3) Internal ROM:
TMP93CF76
TMP93CF77
TMP93CW76
TMP93CU76
TMP93CT76
192 KB
160 KB
128 KB
96 KB
72 KB
(4) Internal RAM:
TMP93CF76
TMP93CF77
TMP93CW76
TMP93CU76
TMP93CT76
4.0 KB
4.0 KB
2.5 KB
2.5 KB
2.0 KB
000707EBP1
•
•
For a discussion of how the reliability of microcontrollers can be predicted, please refer to Section 1.3 of the chapter entitled
Quality and Reliability Assurance / Handling Precautions.
TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in
general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of
the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system,
and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or
damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the
most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling
Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc..
The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal
equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are
neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or
failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy
control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control
instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document
shall be made at the customer’s own risk.
•
•
•
The products described in this document are subject to the foreign exchange and foreign trade laws.
The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by
TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its
use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION
or others.
•
The information contained herein is subject to change without notice.
Purchase of TOSHIBA I2C components conveys a license under the Philips I2C Patent Rights to use these
components in an I2C system, provided that the system conforms to the I2C Standard Specification as defined
by Philips.
93CF76-1
2001-09-07