5秒后页面跳转
TMC150-S12 PDF预览

TMC150-S12

更新时间: 2024-11-10 00:56:59
品牌 Logo 应用领域
TRUMPOWER /
页数 文件大小 规格书
2页 82K
描述
150 Watts AC/DC Medical & ITE Grade Power Supplies

TMC150-S12 数据手册

 浏览型号TMC150-S12的Datasheet PDF文件第2页 
TMC150 Series  
150 WattsAC/DC Medical & ITE Grade Power Supplies  
TRUMPower  
FEATURES  
• 2" x 4" x 1.2" Open Frame  
• Low Leakage Current  
• BF Rated Outputs  
• Remote Sense & Optional PFD  
• 0.5W No Load Power Consumption  
MODELS LIST  
GENERAL SPECIFICATIONS  
Switching Frequency ............. 133 kHz typical  
Maximum Output Power (2)  
Power Factor ......................... 0.98 typical, with active PFC  
Efficiency ............................... 87% typical @ 115 VAC,  
89% typical @ 230 VAC  
Output  
Voltage  
Product No.(1)  
@ Convection  
@ 7.5 CFM  
Hold-up Time......................... 10 ms min. @ 120 VAC  
Operating Altitude .................. 5,000 meters max.  
Line Regulation..................... ±0.5% max. @ full load  
Current Wattage Current Wattage  
TMC150-S12  
TMC150-S15  
TMC150-S18  
TMC150-S24  
TMC150-S30  
TMC150-S36  
12V  
15V  
18V  
24V  
30V  
36V  
48V  
8.35A  
6.7A  
100W  
100W  
100W  
100W  
100W  
100W  
100W  
12.5A  
10A  
150W  
150W  
150W  
150W  
150W  
150W  
150W  
°
°
Operating Temperature ........ 0 C to +70 C  
°
Derating................................. Derate from 100% @ +50 C  
°
linearly to 50% @ +70 C,  
5.56A  
4.2A  
8.34A  
6.25A  
5A  
applicable to convection and  
forced-air cooling conditions  
°
°
Storage Temperature ............ -40 C to +85 C  
Relative Humidity .................. 5% to 95% non-condensing  
Withstand Voltage ................. 4,000 VAC, input-output (2 MOPP)  
1,500 VAC, input-ground (1 MOPP)  
3.34A  
2.78A  
2.1A  
4.17A  
3.13A  
TMC150-S48  
1,500 VAC, output-ground  
MTBF ......................................250 kHrs minimum at full load,  
Notes:  
°
25 C ambient, calculated per  
MIL-HDBK-217F  
1. Add suffix F to the P/N to order units with PFD, e.g. TMC150-S24F.  
2. 168W peak power with 10% duty cycle maximum for less than 15 seconds with  
the average output not to exceed the maximum power rating.  
STANDARDS & COMPLIANCES  
INPUT SPECIFICATIONS  
EN55011, EN55022 .......... Class B conducted, Class A radiated  
FCC.................................... Class B conducted, Class A radiated  
VCCI ................................... Class B conducted, Class A radiated  
EN61000-3-2..................... Harmonic distortion, Class A & D  
EN61000-3-3..................... Line flicker  
EN61000-4-2..................... ESD, ±8 KV air and ±6 KV contact  
EN61000-4-3..................... Radiated immunity, 3V/m  
EN61000-4-4..................... Fast transient/burst, ±2 KV  
EN61000-4-5..................... Surge, ±1 KV diff., ±2 KV com.  
EN61000-4-6..................... Conducted immunity, 3 Vrms  
EN61000-4-8..................... Magnetic field immunity, 3A/m  
EN61000-4-11 ................... Voltage dips immunity,  
30% reduction for 500ms,  
Input Voltage Range .............. 90-264 VAC  
Input Frequency ..................... 47-63 Hz  
Input Current .......................... 1.7A rms @ 115 VAC,  
0.85A rms @ 230 VAC  
Inrush Current ....................... 80A @115VACor160A@ 230 VAC,  
°
at 25 C cold start  
Earth Leakage Current .......... 105 µA max. @ 264 VAC, 63 Hz  
OUTPUT SPECIFICATIONS  
Output Power Ratings ........... See table  
Minimum Load ...................... Not required  
Tolerance ............................... ±2%  
Ripple and Noise* ................. 1% Vp-p, 20 MHz bandwidth  
Remote Sense ...................... Compensates cable losses up  
to 0.5V  
60% reduction for 100ms,  
>95% reduction for 10ms  
Safety Standards ............... IEC/EN 60601-1 (3rd Edition),  
ANSI/AAMI ES 60601-1:2005,  
Overvoltage Protection .......... Set at 112-140% of its nominal  
output voltage  
CSA C22.2 No. 60601-1:08;  
Overcurrent Protection .......... Protected to short-circuit  
conditions  
UL/IEC/EN 60950-1 (2nd Edition),  
CSA C22.2 No. 60950-1 (2nd Edition)  
°
Temperature Coefficient ....... ±0.04%/ C max.  
AgencyApprovals .............. UL, cUL, TUV, CB, CE  
Other Compliance ............. RoHS  
Transient Response............. Max. excursion of 4% or better on  
all models, recovering to 1% of  
final value within 500 µs after a  
25% step load change  
No Load Power Cons. .......... <0.5W w/o PFD, <1W with PFD  
* Measured with a 10µF tantalum capacitor in parallel with a 0.1µF ceramic capacitor  
at rated line voltage and load ranges.  
Tumbler Technologies + TRUMPower  
3350 Scott Blvd., Building 13 • Santa Clara, California 95054, USA 408-988-6616 sales@trumpower.com • www.TRUMPower.com  

与TMC150-S12相关器件

型号 品牌 获取价格 描述 数据表
TMC150-S15 TRUMPOWER

获取价格

150 Watts AC/DC Medical & ITE Grade Power Supplies
TMC150-S18 TRUMPOWER

获取价格

150 Watts AC/DC Medical & ITE Grade Power Supplies
TMC150-S24 TRUMPOWER

获取价格

150 Watts AC/DC Medical & ITE Grade Power Supplies
TMC150-S30 TRUMPOWER

获取价格

150 Watts AC/DC Medical & ITE Grade Power Supplies
TMC150-S36 TRUMPOWER

获取价格

150 Watts AC/DC Medical & ITE Grade Power Supplies
TMC150-S48 TRUMPOWER

获取价格

150 Watts AC/DC Medical & ITE Grade Power Supplies
TMC17A TOSHIBA

获取价格

IC MROM, MICROCONTROLLER, PQFP92, QFP-92, Microcontroller
TMC17B TOSHIBA

获取价格

IC MROM, MICROCONTROLLER, PQFP92, QFP-92, Microcontroller
TMC17C TOSHIBA

获取价格

IC MROM, MICROCONTROLLER, PQFP100, QFP-100, Microcontroller
TMC1AA106KLLH KOA

获取价格

CAPACITOR, TANTALUM, SOLID, POLARIZED, 10V, 10uF, SURFACE MOUNT, 1206, CHIP