TLV840
TLV840
www.ti.com
SNVSBC3C – DECEMBER 2019 – REVISED SEPTEMBER 2020
SNVSBC3C – DECEMBER 2019 – REVISED SEPTEMBER 2020
TLV840 Nano-Power Ultra-Low Voltage Supervisor with Adjustable Reset Time Delay
1 Features
3 Description
•
•
•
Operating voltage range : 0.7 V to 6 V
Nano supply current : 120 nA (Typical)
Fixed threshold voltage (VIT-): 0.8 V to 5.4 V
– Threshold voltages available in 100mV steps
– High accuracy: ±0.5% (Typical)
– Built-in hysteresis (VHYS): 5% (Typical)
Reset time delay (tD): capacitor-based
programmable (TLV840C, TLV840M)
– Minimum time delay: 40 µs (typical) without
capacitor
The TLV840 family of voltage supervisors or reset ICs
can operate at high voltage levels while maintaining
very low quiescent current across the whole VDD and
temperature range. TLV840 offers best combination of
low power consumption, high accuracy and low
propagation delay (tp_HL= 30 µs typical).
Reset output signal is asserted when the voltage at
VDD drops below the negative voltage threshold
(VIT-). Reset signal is cleared when VDD rise above
VIT- plus hysteresis (VHYS) and the reset time delay
(tD) expires. Reset time delay can be programmed by
connecting a capacitor between the CT pin and
ground for TLV840C and TLV840M. For a minimum
reset delay time the CT pin can be left floating.
TLV840N does not offer a programmable delay and
offers fixed reset delay timing options: 40 µs, 2 ms, 10
ms, 30 ms, 50 ms, 80 ms, 100 ms, 150 ms, 200 ms.
•
•
•
Active-low manual reset (MR) (TLV840M)
Four output topologies:
– TLV840xxDL: open-drain, active-low (RESET)
– TLV840xxPL: push-pull, active-low (RESET)
– TLV840xxDH: open-drain, active-high (RESET)
– TLV840xxPH: push-pull, active-high (RESET)
Wide temperature range: –40°C to +125°C
Package: SOT23-5 (DBV)
•
•
Additional features: Low power-on reset voltage
(VPOR), built-in glitch immunity protection for VDD,
built-in hysteresis, low open-drain output leakage
2 Applications
current (Ilkg(OD)). TLV840 is
a
perfect voltage
•
•
•
•
•
•
•
Motor Drives
monitoring solution for industrial applications and
battery-powered / low-power applications.
Factory Automation and Control
Home Theater and Entertainment
Electronic Point of Sale
Grid Infrastructure
Data Center and Enterprise Computing
Multifunction Printer
Device Information
PART NUMBER
TLV840
PACKAGE(1)
BODY SIZE (NOM)
SOT-23 (5) (DBV)
2.90 mm × 1.60 mm
(1) For package details, see the mechanical drawing addendum
at the end of the data sheet.
0.4
25°C
-40°C
125°C
0.36
0.32
0.28
0.24
0.2
3.3 V
5 V
IN
LDO
OUT
*Rpu
VDD
VDD
Microcontroller
RESET
CT
RESET
TLV840CADL29
GND
0.16
0.12
0.08
*Rpu only for open-drain output
Typical Application Circuit
0.5
1
1.5
2
2.5
3 3.5
VDD (V)
4
4.5
5
5.5
6
IDDv
Typical Supply Current
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
Copyright © 2020 Texas Instruments Incorporated
Submit Document Feedback
1
Product Folder Links: TLV840