TLV840-Q1
TLV840-Q1
www.ti.com
SNVSBY3A – NOVEMBER 2020 – REVISED APRIL 2021
SNVSBY3A – NOVEMBER 2020 – REVISED APRIL 2021
TLV840-Q1 Nano-Power Voltage Supervisor with Adjustable Reset Time Delay
1 Features
3 Description
Qualified for automotive applications:
The TLV840-Q1 device is a voltage supervisor or
reset IC that can operate at wide input voltage levels
from 0.7 V to 6 V while maintaining very low quiescent
current across the whole VDD and temperature range.
TLV840-Q1 offers the best combination of low power
consumption, high accuracy and low propagation
delay (tp_HL= 30 µs typical).
•
AEC-Q100 qualified with the following results:
– Device temperature grade 1: –40°C to +125°C
ambient operating temperature
– Device HBM ESD classification level 2
– Device CDM ESD classification level C7B
Designed for high performance:
Reset output signal is asserted when the voltage at
VDD drops below the negative voltage threshold
(VIT-). Reset signal is cleared when VDD rise above
VIT- plus hysteresis (VHYS) and the reset time delay
(tD) expires. Reset time delay can be programmed
by connecting a capacitor between the CT pin and
ground. For a minimum reset delay time the CT pin
can be left floating. The TLV840-Q1, with its manual
reset pin (MR), offers program flexibility by forcing the
system into a hard reset when the pin is asserted.
•
•
•
•
Nano supply current : 120 nA (Typ)
High accuracy: ±0.5% (Typ)
Built-in hysteresis (VHYS): 5% (Typ)
Fixed threshold voltage (VIT-): 0.8 V to 5.4 V
Designed for a wide range of applications:
•
•
•
Operating voltage range : 0.7 V to 6 V
Fixed (VIT-) voltage: 0.8 V to 5.4 V in 0.1 V steps
Programmable reset time delay (tD)
– Min time delay: 40 µs (typ) without capacitor
Active-low manual reset (MR)
Additional features: Low power-on reset voltage
(VPOR), built-in glitch immunity protection for VDD,
built-in hysteresis, low open-drain output leakage
current (Ilkg(OD)). TLV840-Q1 is a perfect voltage
monitoring solution for automotive applications and
battery-powered / low-power applications.
•
Multiple output topologies / Package type:
•
Four output topologies (RESET / RESET):
– TLV840MADL-Q1: open-drain, active-low
– TLV840MAPL-Q1: push-pull, active-low
– TLV840MADH-Q1: open-drain, active-high
– TLV840MAPH-Q1: push-pull, active-high
Package: SOT23-5 (DBV)
Device Information
PART NUMBER
PACKAGE (1)
BODY SIZE (NOM)
TLV840-Q1
SOT-23 (5) (DBV)
2.90 mm × 1.60 mm
•
2 Applications
(1) For package details, see the mechanical drawing addendum
at the end of the data sheet.
•
•
•
•
•
•
•
Surround view system, front camera
Automotive gateway
Radar ECU
Automotive head unit
ADAS controller
Emergency call
Telematics control unit
0.4
25°C
-40°C
125°C
3.3 V
5 V
IN
LDO
OUT
0.36
0.32
0.28
0.24
0.2
*Rpu
VDD
VDD
Microcontroller
RESET
CT
RESET
TLV840MADL29Q1
MR
GND
0.16
0.12
0.08
*Rpu only for open-drain output
Typical Application Circuit
0.5
1
1.5
2
2.5
3 3.5
VDD (V)
4
4.5
5
5.5
6
IDDv
Typical Supply Current
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
Product Folder Links: TLV840-Q1
Copyright © 2021 Texas Instruments Incorporated
Submit Document Feedback
1