5秒后页面跳转
TLV2548-EP PDF预览

TLV2548-EP

更新时间: 2024-11-23 12:47:11
品牌 Logo 应用领域
德州仪器 - TI 转换器
页数 文件大小 规格书
38页 1117K
描述
3.0-V TO 5.5-V, 12-BIT, 200-KSPS, 4-/8-CHANNEL, LOW-POWER SERIAL ANALOG-TO-DIGITAL CONVERTER WITH AUTOPOWER-DOWN

TLV2548-EP 数据手册

 浏览型号TLV2548-EP的Datasheet PDF文件第2页浏览型号TLV2548-EP的Datasheet PDF文件第3页浏览型号TLV2548-EP的Datasheet PDF文件第4页浏览型号TLV2548-EP的Datasheet PDF文件第5页浏览型号TLV2548-EP的Datasheet PDF文件第6页浏览型号TLV2548-EP的Datasheet PDF文件第7页 
TLV2548-EP  
www.ti.com  
SLAS668 OCTOBER 2009  
3.0-V TO 5.5-V, 12-BIT, 200-KSPS, 4-/8-CHANNEL, LOW-POWER SERIAL  
ANALOG-TO-DIGITAL CONVERTER WITH AUTOPOWER-DOWN  
Check for Samples: TLV2548-EP  
1
FEATURES  
SUPPORTS DEFENSE, AEROSPACE,  
AND MEDICAL APPLICATIONS  
Maximum Throughput 200-KSPS  
Controlled Baseline  
One Assembly/Test Site  
One Fabrication Site  
Available in Military (–55°C/125°C)  
Temperature Range(1)  
Extended Product Life Cycle  
Extended Product-Change Notification  
Product Traceability  
Built-In Reference, Conversion Clock and  
8x FIFO  
Differential/Integral Nonlinearity Error: ±1.2  
LSB  
Signal-to-Noise and Distortion Ratio: 70 dB,  
fi = 12 kHz  
Spurious Free Dynamic Range: 75 dB,  
fi = 12 kHz  
SPI (CPOL = 0, CPHA = 0)/DSP-Compatible  
Serial Interfaces With SCLK up to 20 MHz  
PW PACKAGE  
(TOP VIEW)  
Single Wide Range Supply 3.0 Vdc to 5.5 Vdc  
SDO  
SDI  
1
20 CS  
Analog Input Range 0 V to Supply Voltage  
With 500-kHz BW  
2
19  
18  
17  
16  
15  
14  
13  
12  
11  
REFP  
REFM  
FS  
3
SCLK  
4
EOC/(INT)  
Hardware Controlled and Programmable  
Sampling Period  
5
V
PWDN  
GND  
CSTART  
A7  
CC  
6
A0  
A1  
A2  
A3  
A4  
Low Operating Current (1.0 mA at 3.3 V,  
2.0 mA at 5.5 V With External Ref, 1.7-mA at  
3.3V, 2.4-mA at 5.5-V With Internal Ref)  
7
8
9
A6  
Power Down: Software/Hardware  
Power-Down Mode (1 μA Max, Ext Ref),  
Autopower-Down Mode (1 μA, Ext Ref)  
10  
A5  
Programmable Auto-Channel Sweep  
(1) Custom temperature ranges available  
DESCRIPTION  
The TLV2548 is a high performance, 12-bit low-power, 3.86-μs, CMOS analog-to-digital converter (ADC) which  
operates from a single 3.0-V to 5.5-V power supply. This device has three digital inputs and a 3-state output [chip  
select (CS), serial input-output clock (SCLK), serial data input (SDI), and serial data output (SDO)] that provide a  
direct 4-wire interface to the serial port of most popular host microprocessors (SPI interface). When interfaced  
with a TI DSP, a frame sync (FS) signal is used to indicate the start of a serial data frame.  
In addition to a high-speed A/D converter and versatile control capability, this device has an on-chip analog  
multiplexer that can select any analog inputs or one of three internal self-test voltages. The sample-and-hold  
function is automatically started after the fourth SCLK edge (normal sampling) or can be controlled by a special  
pin, CSTART, to extend the sampling period (extended sampling). The normal sampling period can also be  
programmed as short (12 SCLKs) or as long (24 SCLKs) to accommodate faster SCLK operation popular among  
high-performance signal processors. The TLV2548 is designed to operate with very low power consumption. The  
power-saving feature is further enhanced with software/hardware/autopower-down modes and programmable  
conversion speeds. The conversion clock (OSC) and reference are built-in. The converter can use the external  
SCLK as the source of the conversion clock to achieve higher (up to 2.8 μs when a 20-MHz SCLK is used)  
conversion speed. Two different internal reference voltages are available. An optional external reference can also  
be used to achieve maximum flexibility.  
The TLV2548 is characterized for operation from –55°C to 125°C.  
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas  
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
PRODUCTION DATA information is current as of publication date.  
Copyright © 2009, Texas Instruments Incorporated  
Products conform to specifications per the terms of the Texas  
Instruments standard warranty. Production processing does not  
necessarily include testing of all parameters.  

与TLV2548-EP相关器件

型号 品牌 获取价格 描述 数据表
TLV2548IDW TI

获取价格

2.7 V TO 5.5 V, 12-BIT, 200 KSPS, 4/8 CHANNEL, LOW POWER, SERIAL ANALOG-TO-DIGITAL CONVERT
TLV2548IDWR TI

获取价格

12 位 200kSPS ADC 系列输出、自动断电(软件和硬件)、低功耗、8 x FIF
TLV2548IDWRG4 TI

获取价格

12-Bit 200 kSPS ADC Ser. Out, Auto Pwrdn (S/W and H/W), Low Power W/8 x FIFO W/8 Ch. 20-SO
TLV2548IPW TI

获取价格

2.7 V TO 5.5 V, 12-BIT, 200 KSPS, 4/8 CHANNEL, LOW POWER, SERIAL ANALOG-TO-DIGITAL CONVERT
TLV2548IPWG4 TI

获取价格

12 位 200kSPS ADC 系列输出、自动断电(软件和硬件)、低功耗、8 x FIF
TLV2548IPWLE TI

获取价格

8-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO20
TLV2548IPWR TI

获取价格

12-Bit 200 kSPS ADC Ser. Out, Auto Pwrdn (S/W and H/W), Low Power W/8 x FIFO W/8 Ch. 20-TS
TLV2548IPWRG4 TI

获取价格

12-Bit 200 kSPS ADC Ser. Out, Auto Pwrdn (S/W and H/W), Low Power W/8 x FIFO W/8 Ch. 20-TS
TLV2548M TI

获取价格

3-V TO 5.5-V, 12-BIT, 200-KSPS, 4-/8-CHANNEL, LOW-POWER SERIAL ANALOG-TO-DIGITAL CONVERTER
TLV2548MFK TI

获取价格

3-V TO 5.5-V, 12-BIT, 200-KSPS, 4-/8-CHANNEL, LOW-POWER SERIAL ANALOG-TO-DIGITAL CONVERTER