5秒后页面跳转
捷配首页

Datasheet > 驱动程序和接口 > 显示驱动器> TLC5916ID
TLC5916ID PDF预览

TLC5916ID

更新时间： 2024-11-29 04:28:07
品牌 Logo 应用领域
德州仪器 - TI 显示驱动器驱动程序和接口接口集成电路光电二极管PC
页数 文件大小 规格书
30页 766K
描述
8-BIT CONSTANT-CURRENT LED SINK DRIVERS

阅读下载

中文翻译

获取价格

TLC5916ID 技术参数

是否无铅：不含铅是否Rohs认证：符合
生命周期：Active零件包装代码：SOIC
包装说明：SOIC-16针数：16
Reach Compliance Code：compliantECCN代码：EAR99
HTS代码：8542.39.00.01Factory Lead Time：6 weeks
风险等级：1.53Samacsys Confidence：4
Samacsys Status：ReleasedSamacsys PartID：307606
Samacsys Pin Count：16Samacsys Part Category：Integrated Circuit
Samacsys Package Category：Small Outline PackagesSamacsys Footprint Name：D (R-PDSO-G16)
Samacsys Released Date：2018-01-09 11:22:57Is Samacsys：N
数据输入模式：SERIAL显示模式：SEGMENT
输入特性：STANDARD接口集成电路类型：LED DISPLAY DRIVER
JESD-30 代码：R-PDSO-G16JESD-609代码：e4
长度：9.9 mm湿度敏感等级：1
复用显示功能：NO功能数量：1
区段数：2端子数量：16
最高工作温度：125 °C最低工作温度：-40 °C
输出特性：CONSTANT-CURRENT封装主体材料：PLASTIC/EPOXY
封装代码：SOP封装等效代码：SOP16,.25
封装形状：RECTANGULAR封装形式：SMALL OUTLINE
峰值回流温度（摄氏度）：260电源：3/5.5 V
认证状态：Not Qualified座面最大高度：1.75 mm
子类别：Display Drivers最大压摆率：22 mA
最大供电电压：5.5 V最小供电电压：3 V
标称供电电压：3.3 V表面贴装：YES
温度等级：AUTOMOTIVE端子面层：Nickel/Palladium/Gold (Ni/Pd/Au)
端子形式：GULL WING端子节距：1.27 mm
端子位置：DUAL处于峰值回流温度下的最长时间：NOT SPECIFIED
宽度：3.9 mm最小 fmax：30 MHz
Base Number Matches：1

TLC5916ID 数据手册

 浏览型号TLC5916ID的Datasheet PDF文件第2页浏览型号TLC5916ID的Datasheet PDF文件第3页浏览型号TLC5916ID的Datasheet PDF文件第4页浏览型号TLC5916ID的Datasheet PDF文件第5页浏览型号TLC5916ID的Datasheet PDF文件第6页浏览型号TLC5916ID的Datasheet PDF文件第7页 
TLC5916, TLC5917  
8-BIT CONSTANT-CURRENT LED SINK DRIVERS  
www.ti.com  
SLVS695–JUNE 2007  
FEATURES  
•
•
Eight Constant-Current Output Channels  
•
•
•
•
30-MHz Clock Frequency  
Schmitt-Trigger Input  
Output Current Adjusted Through External  
Resistor  
3.3-V or 5-V Supply Voltage  
•
•
•
Constant Output Current Range:  
5 mA to 120 mA  
Thermal Shutdown for Overtemperature  
Protection  
Constant Output Current Invariant to Load  
Voltage Change  
APPLICATIONS  
•
•
•
•
•
•
General LED Lighting Applications  
LED Display Systems  
LED Signage  
Automotive LED Lighting  
White Goods  
Open Load, Short Load and Overtemperature  
Detection  
•
•
256-Step Programmable Global Current Gain  
Excellent Output Current Accuracy:  
–
–
Between Channels: < ±3% (Max)  
Between ICs: < ±6% (Max)  
Gaming Machines/Entertainment  
•
Fast Response of Output Current  
DESCRIPTION/ORDERING INFORMATION  
The TLC5916/TLC5917 is designed for LED displays and LED lighting applications with constant-current control  
and open-load, shorted-load, and overtemperature detection. The TLC5916/TLC5917 contains an 8-bit shift  
register and data latches, which convert serial input data into parallel output format. At the output stage, eight  
regulated current ports are designed to provide uniform and constant current for driving LEDs within a wide  
range of VF variations. Used in system design for LED display applications, e.g., LED panels, it provides great  
flexibility and device performance. Users can adjust the output current from 5 mA to 120 mA through an external  
resistor, Rext, which gives flexibility in controlling the light intensity of LEDs. The devices are designed for up to  
17 V at the output port. The high clock frequency, 30 MHz, also satisfies the system requirements of  
high-volume data transmission.  
The TLC5916/TLC5917 provides a Special Mode in which two functions are included, Error Detection and  
Current Gain Control. There are two operation modes and three phases: Normal Mode phase, Mode Switching  
transition phase, and Special Mode phase. The signal on the multiple function pin OE(ED2) is monitored to  
determine the mode. When an one-clock-wide pulse appears on OE(ED2), the device enters the Mode  
Switching phase. At this time, the voltage level on LE(ED1) determines the mode to which the  
TLC5916/TLC5917 switches.  
In the Normal Mode phase, the serial data can be transferred into TLC5916/TLC5917 via the pin SDI, shifted in  
the shift register, and transferred out via the pin SDO. LE(ED1) can latch the serial data in the shift register to  
the output latch. OE(ED2) enables the output drivers to sink current.  
In the Special Mode phase, the low-voltage-level signal OE(ED2) can enable output channels and detect the  
status of the output current, to determine if the driving current level is sufficient. The detected Error Status is  
loaded into the 8-bit shift register and shifted out via the pin SDO along with the CLK signal. The system  
controller can read the error status and determine whether or not the LEDs are properly lit.  
In the Special Mode phase, the TLC5916/TLC5917 allows users to adjust the output current level by setting a  
runtime-programmable Configuration Code. The code is sent into the TLC5916/TLC5917 via SDI. The positive  
pulse of LE(ED1) latches the code in the shift register into a built-in 8-bit configuration latch, instead of the  
output latch. The code affects the voltage at the terminal R-EXT and controls the output-current regulator. The  
output current can be finely adjusted by a gain ranging from 1/12 to 127/128 in 256 steps. Therefore, the current  
skew between ICs can be compensated within less than 1%. This feature is suitable for white balancing in LED  
color display panels.  
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas  
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
PRODUCT PREVIEW information concerns products in the  
Copyright © 2007, Texas Instruments Incorporated  
formative or design phase of development. Characteristic data and  
other specifications are design goals. Texas Instruments reserves  
the right to change or discontinue these products without notice.  
1234567...30

中文翻译

下载PDF

TLC5916ID 替代型号

型号 品牌 替代类型 描述 数据表
TLC5916IDRG4 TI

类似代替

 8-BIT CONSTANT-CURRENT LED SINK DRIVERS
TLC5916IDG4 TI

类似代替

 8-BIT CONSTANT-CURRENT LED SINK DRIVERS
TLC5916IDR TI

类似代替

 8-BIT CONSTANT-CURRENT LED SINK DRIVERS

与TLC5916ID相关器件

型号 品牌 获取价格 描述 数据表
TLC5916IDG4 TI

获取价格

 		8-BIT CONSTANT-CURRENT LED SINK DRIVERS
TLC5916IDR TI

获取价格

 		8-BIT CONSTANT-CURRENT LED SINK DRIVERS
TLC5916IDRG4 TI

获取价格

 		8-BIT CONSTANT-CURRENT LED SINK DRIVERS
TLC5916IN TI

获取价格

 		8-BIT CONSTANT-CURRENT LED SINK DRIVERS
TLC5916INE4 TI

获取价格

 		8-BIT CONSTANT-CURRENT LED SINK DRIVERS
TLC5916IPW TI

获取价格

 		8-BIT CONSTANT-CURRENT LED SINK DRIVERS
TLC5916IPWG4 TI

获取价格

 		8-BIT CONSTANT-CURRENT LED SINK DRIVERS
TLC5916IPWR TI

获取价格

 		8-BIT CONSTANT-CURRENT LED SINK DRIVERS
TLC5916IPWRG4 TI

获取价格

 		8-BIT CONSTANT-CURRENT LED SINK DRIVERS
TLC5916-Q1 TI

获取价格

 		8-BIT CONSTANT-CURRENT LED SINK DRIVERS

与TLC5916ID相关文章

您还可以找


热门产品
PCB打样/小批量
铝基板
BOM智能配单
PCBA制造
钣金
精密CNC
模具注塑
薄膜开关
精选活动
PCBA打样特惠
四六层板品质升级
铝基板品质升级
一体化电子制造
DFM下载
服务支持
企业认证
产品展示
工厂展示
工艺能力
积分商城
关于捷配
捷配简介
企业文化
公司动态
人才招聘
联系我们
帮助中心
下单流程
付款流程
开票流程
常见问题
全球PCB制造服务专线 400-613-0088

工作时间：9:00-21:00

CEO邮箱：ceo@jiepei.com

投诉邮箱：tousu@jiepei.com

捷配网-微信公众号 微信公众号
捷配网-微信公众号 抖音公众号
资质认证：
合作快递：
支付方式：
Copyright © 2024 Jiepei.com Inc. All Rights Reserved. 版权所有:杭州捷配信息科技有限公司 浙公网安备 33010502006866号 浙ICP备10014259号-119 营业执照ICP证