THS4521
THS4522
THS4524
www.ti.com
SBOS458D –DECEMBER 2008–REVISED AUGUST 2010
VERY LOW POWER, NEGATIVE RAIL INPUT, RAIL-TO-RAIL OUTPUT,
FULLY DIFFERENTIAL AMPLIFIER
Check for Samples: THS4521, THS4522, THS4524
1
FEATURES
APPLICATIONS
•
•
•
•
Low-Power SAR and ΔΣ ADC Drivers
Low-Power Differential Driver
Low-Power Differential Signal Conditioning
Low-Power, High-Performance Differential
Audio Amplifier
23
•
Fully Differential Architecture
•
Bandwidth: 145 MHz
•
•
•
•
•
Slew Rate: 490 V/ms
HD2: –133 dBc at 10 kHz (1 VRMS, RL = 1 kΩ)
HD3: –140 dBc at 10 kHz (1 VRMS, RL = 1 kΩ)
Input Voltage Noise: 4.6 nV/√Hz (f = 100 kHz)
THD+N: –112dBc (0.00025%) at 1 kHz (22-kHz
DESCRIPTION
The THS4521, THS4522, and THS4524 family of
devices are very low-power, fully differential op amps
with rail-to-rail output and an input common-mode
range that includes the negative rail. These amplifiers
are designed for low-power data acquisition systems
and
dissipation is
BW, G = 1, 5 VPP
)
•
•
•
•
Open-Loop Gain: 119 dB
NRI—Negative Rail Input
RRO—Rail-to-Rail Output
high-density
applications
critical parameter, and provide
where
power
Output Common-Mode Control (with Low
Offset and Drift)
a
exceptional performance in audio applications.
•
Power Supply:
The family includes single (THS4521), dual
(THS4522), and quad (THS4524) versions.
–
–
Voltage: +2.5 V (±1.25 V) to +5.5 V (±2.75 V)
Current: 1.14 mA/ch
These fully differential op amps feature accurate
output common-mode control that allows for
dc-coupling when driving analog-to-digital converters
(ADCs). This control, coupled with an input
common-mode range below the negative rail as well
as rail-to-rail output, allows for easy interfacing
between single-ended, ground-referenced signal
sources. Additionally, these devices are ideally suited
for driving both successive-approximation register
(SAR) and delta-sigma (ΔΣ) ADCs using only a single
+2.5V to +5V and ground power supply.
•
Power-Down Capability: 20 mA (typ)
THS4521 and ADS1278 Combined Performance
1 kW
1.5 nF
5 V
49.9 W
1 kW
AINN1
VIN+
2.2 nF
THS4521
ADS1278 (CH 1)
49.9 W
VIN-
AINP1 VCOM
1 kW
VOCM
x1
0.1 mF
0.1 mF
1/2
OPA2350
1.5 nF
The THS4521, THS4522, and THS4524 family of fully
differential op amps is characterized for operation
over the full industrial temperature range from –40°C
to +85°C.
1 kW
1-kHz FFT
0
-20
-40
-60
-80
G = 1
RF = RG = 1 kW
CF = 1.5 nF
VS = 5 V
Load = 2 x 49.9 W + 2.2 nF
RELATED
PRODUCTS
-100
-120
-140
-160
THD
(dBc)
BW
(MHz)
at 100
kHz
VN
RAIL-
0
4
8
12
16
20
24 26
Frequency (kHz)
DEVICE
THS4520
THS4121
THS4130
IQ (mA)
15.3
16
(nV/√Hz) TO-RAIL
Tone
Signal
(dBFS)
-0.50
SINAD
(dBc)
105.5
SFDR
(dBc)
113.7
570
100
150
–114
–79
2
Out
In/Out
No
SNR (dBc) THD (dBc)
-107.9
(Hz)
1 k
109.1
5.4
1.3
16
–107
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
3
I2S is a trademark of NXP Semiconductor.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2008–2010, Texas Instruments Incorporated