THS4531A
www.ti.com
SLOS823A –DECEMBER 2012–REVISED JANUARY 2013
Ultra Low Power, Rail-to-Rail Output, Fully-Differential Amplifier
Check for Samples: THS4531A
1
FEATURES
DESCRIPTION
The THS4531A is a low-power, fully-differential op
amp with input common-mode range below the
negative rail and rail-to-rail output. The device is
designed for low-power data acquisition systems and
high density applications where power consumption
and dissipation is critical.
•
Ultra Low Power:
–
–
–
Voltage: 2.5 V to 5.5 V
Current: 250 µA
Power-Down Mode: 0.5 µA (typ)
•
•
•
•
•
•
Fully-Differential Architecture
Bandwidth: 36 MHz
The device features accurate output common-mode
control that allows for dc coupling when driving
analog-to-digital converters (ADCs). This control,
coupled with the input common-mode range below
the negative rail and rail-to-rail output, allows for easy
interface from single-ended ground-referenced signal
sources to successive-approximation registers
(SARs), and delta-sigma (ΔΣ) ADCs using only
single-supply 2.5-V to 5-V power. The THS4531A is
also a valuable tool for general-purpose, low-power
differential signal conditioning applications.
Slew Rate: 200 V/µs
THD: –120 dBc at 1 kHz (1 VRMS, RL= 2 kΩ)
Input Voltage Noise: 10 nV/√Hz (f = 1 kHz)
High DC Accuracy:
–
–
–
VOS: ±100 µV
VOS Drift: ±3 µV/˚C (–40°C to +125°C)
AOL: 114 dB
•
•
•
Rail-to-Rail Output (RRO)
Negative Rail Input (NRI)
Output Common-Mode Control
The THS4531A is characterized for operation over
the extended industrial temperature range from
–40°C to +125°C. The following package options are
available:
APPLICATIONS
•
•
8-pin SOIC (MSOP) and VSSOP (D and DGK)
10-pin WQFN (RUN)
•
•
Low-Power SAR, ΔΣ ADC Driver
Low Power, High Performance:
0
−10
−20
−30
−40
VS = 5 V
G = 1 V/V
VOUT = 1 VRMS
RF = 2 kΩ
–
–
Differential to Differential Amplifier
Single-Ended to Differential Amplifier
RL = 600 Ω
•
•
Low-Power, Wide-Bandwidth Differential Driver
−50
−60
−70
−80
Low-Power, Wide-Bandwidth Differential
Signal Conditioning
−90
•
High Channel Count and Power Dense
Systems
−100
−110
−120
−130
−140
0
5k
10k
15k
20k
24k
Frequency (Hz)
G071
Figure 1. 1-kHz FFT Plot on Audio Analyzer
Table 1. Related Products
THD (dBc) at 100
DEVICE
BW (MHz)
IQ (mA)
kHz
VN (nV/√Hz)
RAIL-TO-RAIL
THS4521
THS4520
THS4121
THS4131
145
570
100
150
1.14
15.3
16
–120
–114
–79
4.6
2
Out
Out
5.4
1.3
In/Out
No
16
–107
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2012–2013, Texas Instruments Incorporated