THS4531
www.ti.com
SLOS358B –SEPTEMBER 2011–REVISED MARCH 2012
Ultra Low Power, Rail-to-Rail Output, Fully-Differential Amplifier
Check for Samples: THS4531
1
FEATURES
DESCRIPTION
The THS4531 is a low-power, fully-differential op amp
with input common-mode range below the negative
rail and rail-to-rail output. The device is designed for
low-power data acquisition systems and high density
applications where power consumption and
dissipation is critical.
•
Ultra Low Power:
–
–
–
Voltage: 2.5 V to 5.5 V
Current: 250 µA
Power-Down Mode: 0.5 µA (typ)
•
•
•
•
•
•
Fully-Differential Architecture
Bandwidth: 36 MHz
The device features accurate output common-mode
control that allows for dc coupling when driving
analog-to-digital converters (ADCs). This control,
coupled with the input common-mode range below
the negative rail and rail-to-rail output, allows for easy
interface from single-ended ground-referenced signal
sources to successive-approximation registers
(SARs), and delta-sigma (ΔΣ) ADCs using only
single-supply 2.5-V to 5-V power. The THS4531 is
also a valuable tool for general-purpose, low-power
differential signal conditioning applications.
Slew Rate: 200 V/µs
THD: –120 dBc at 1 kHz (1 VRMS, RL= 2 kΩ)
Input Voltage Noise: 10 nV/√Hz (f = 1 kHz)
High DC Accuracy:
–
–
VOS Drift: ±4 µV/˚C (–40°C to +125°C)
AOL: 114 dB
•
•
•
Rail-to-Rail Output (RRO)
Negative Rail Input (NRI)
Output Common-Mode Control
The THS4531 is characterized for operation over the
extended industrial temperature range from –40°C to
+125°C. The following package options are available:
APPLICATIONS
•
•
8-pin SOIC (MSOP) and VSSOP (D and DGK)
10-pin WQFN (RUN)
•
•
Low-Power SAR, ΔΣ ADC Driver
Low Power, High Performance:
0
VS = 5 V
G = 1 V/V
VOUT = 1 VRMS
RF = 2 kΩ
−10
−20
−30
−40
−50
–
–
Differential to Differential Amplifier
Single-Ended to Differential Amplifier
•
•
Low-Power, Wide-Bandwidth Differential Driver
RL = 600 Ω
Low-Power, Wide-Bandwidth Differential
Signal Conditioning
−60
−70
−80
−90
−100
−110
−120
−130
−140
•
High Channel Count and Power Dense
Systems
0
5k
10k
15k
20k
24k
Frequency (Hz)
G071
Figure 1. 1-kHz FFT Plot on Audio Analyzer
Table 1. Related Products
THD (dBc) at 100
DEVICE
BW (MHz)
IQ (mA)
kHz
VN (nV/√Hz)
RAIL-TO-RAIL
THS4521
THS4520
THS4121
THS4131
145
570
100
150
1.14
15.3
16
–120
–114
–79
4.6
2
Out
Out
5.4
1.3
In/Out
No
16
–107
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2011–2012, Texas Instruments Incorporated