6600W Transient Voltage Suppressor (TVS)
TH8S Series
15 To 43 V
6600W
Description
The TH8S series of high current uni/bi-directional transient
suppressors are designed for A.C. line protection and high power
DC
bus
clamping
applications.These
devices
offer
uni/bi-directional port protection from 15 volts to 43 volts.
They provide a clamping voltage lower than the avalanche
voltage. Therefore, any voltage rise due to increased current
conduction is contained to a minimum, providing the best possible
protection level. They can also be connected in series and/or
parallel to create very high capacity protection solutions.
Functional Diagram
Features
u
u
u
u
u
u
u
u
u
Low zener impedance.
Excellent clamping capability.
JEDEC R-6/P-600 Molded Plastic.
Repetition rate (duty cycle): 0.01%.
Color band denoted cathode except bidirectional.
High temperature soldering: 260℃/10s at terminals.
Glass passivated chip junction in R-6/P600 package.
6600W Peak Pulse power capability at 10×1000μs waveform.
Fast response time: typically less than 1.0ps from 0V to VBR
min.
Bi-directional
Cathode
Anode
Uni-direction
u
AEC-Q101 qualified.
Absolute Maximum Ratings (TA=25℃,RH=45%-75%, unless otherwise noted)
Parameter
Symbol
PPP
Value
Unit
W
A
Peak pulse power dissipation on 10/1000µs waveform
Peak pulse current of on 10/1000µs waveform
Steady state power dissipation at TL=75℃
6600
See Next Table
8
IPP
PM(AV)
TJ , TSTG
IFSM
W
℃
A
Operating junction and storage temperature range
Peak forward surge current, 8.3 ms single half sine-wave
-55 to +150
500
SOCAY Electronics Corp., Ltd.
www.socay.com
@ SOCAY Electronics Corp., Ltd. 2019.
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.
Revision November 8, 2019
1 / 4