5秒后页面跳转
TDA8595 PDF预览

TDA8595

更新时间: 2024-10-28 04:28:35
品牌 Logo 应用领域
恩智浦 - NXP 放大器功率放大器
页数 文件大小 规格书
50页 295K
描述
I2C-bus controlled 4 ⅴ 45 W power amplifier

TDA8595 数据手册

 浏览型号TDA8595的Datasheet PDF文件第2页浏览型号TDA8595的Datasheet PDF文件第3页浏览型号TDA8595的Datasheet PDF文件第4页浏览型号TDA8595的Datasheet PDF文件第5页浏览型号TDA8595的Datasheet PDF文件第6页浏览型号TDA8595的Datasheet PDF文件第7页 
TDA8595  
I2C-bus controlled 4 × 45 W power amplifier  
Rev. 02 — 21 November 2007  
Product data sheet  
1. General description  
The TDA8595 is a complementary quad Bridge Tied Load (BTL) audio power amplifier  
made in BCDMOS technology. It contains four independent amplifiers in BTL  
configuration. Through the I2C-bus, diagnosis of temperature warning and clipping level is  
fully programmable and the information available via two diagnostic pins is selectable. The  
status of each amplifier (output offset, load or no load, short-circuit or speaker incorrectly  
connected) can be read separately.  
2. Features  
2.1 General  
I Operates in legacy mode (non I2C-bus) and I2C-bus mode (3.3 V and 5 V compliant)  
I Three hardware-programmable I2C-bus addresses  
I Drive 4 or 2 loads  
I Speaker fault detection  
I Independent short-circuit protection per channel  
I Loss of ground and open VP safe (with 150 mseries impedance and a supply  
decoupling capacitor of 2200 µF maximum)  
I All outputs short-circuit proof to ground, supply voltage and across the load  
I All pins short-circuit proof to ground  
I Temperature-controlled gain reduction to prevent audio holes at high junction  
temperatures  
I Low battery voltage detection  
I Offset detection  
I This part has been qualified in accordance with AEC-Q100  
2.2 I2C-bus mode  
I DC load detection: open-circuit, short-circuit and load present  
I AC load (tweeter) detection  
I During start-up, can detect which load is connected so the appropriate gain can be  
selected without audio pop  
I Independently selectable soft mute of front channels (channel 1 and channel 3) and  
rear channels (channel 2 and channel 4)  
I Programmable gain (26 dB and 16 dB) of front channels and rear channels  
I Fully programmable diagnostic levels can be set:  
N Programmable clip detection: 2 %, 5 % or 10 %  
N Programmable thermal pre-warning  

与TDA8595相关器件

型号 品牌 获取价格 描述 数据表
TDA8595J NXP

获取价格

I2C-bus controlled 4 ⅴ 45 W power amplifier
TDA8595J/N2,112 NXP

获取价格

TDA8595 - I²C-bus controlled 4 x 45 W power a
TDA8595J/N2S,112 NXP

获取价格

TDA8595 - I²C-bus controlled 4 x 45 W power a
TDA8595SD NXP

获取价格

I2C-bus controlled 4 ⅴ 45 W power amplifier
TDA8595SD/N2,112 NXP

获取价格

TDA8595 - I²C-bus controlled 4 x 45 W power a
TDA8595TH NXP

获取价格

I2C-bus controlled 4 ⅴ 45 W power amplifier
TDA8595TH/N2,512 NXP

获取价格

TDA8595 - I²C-bus controlled 4 x 45 W power a
TDA8595TH/N2,518 NXP

获取价格

TDA8595 - I²C-bus controlled 4 x 45 W power a
TDA8595TH/N2/R4,51 NXP

获取价格

TDA8595 - I²C-bus controlled 4 x 45 W power a
TDA8595TH/N2C,112 NXP

获取价格

TDA8595 - I²C-bus controlled 4 x 45 W power a