TC642
M
• Temperature Proportional Fan Speed for Acoustic
Control and Longer Fan Life
• Efficient PWM Fan Drive
• 3.0V to 5.5V Supply Range:
PWM Fan Speed Controller with FanSense™ Technology
Features
Package Types
SOIC/PDIP/MSOP
V
V
V
1
2
3
4
8
7
6
5
IN
DD
C
F
OUT
TC642
- Fan Voltage Independent of TC642
Supply Voltage
- Supports any Fan Voltage
V
MIN
FAULT
SENSE
GND
• FanSense™ Fault Detection Circuits Protect
Against Fan Failure and Aid System Testing
General Description
• Shutdown Mode for "Green" Systems
• Supports Low Cost NTC/PTC Thermistors
• Space Saving 8-Pin MSOP Package
• Over-temperature Indication
The TC642 is a switch mode fan speed controller for
use with brushless DC fans. Temperature proportional
speed control is accomplished using pulse width mod-
ulation (PWM). A thermistor (or other voltage output
temperature sensor) connected to the V input fur-
IN
Applications
• Power Supplies
• Personal Computers
• File Servers
• Telecom Equipment
• UPSs, Power Amps, etc.
• General Purpose Fan Speed Control
nishes the required control voltage of 1.25V to 2.65V
(typical) for 0% to 100% PWM duty cycle. Minimum fan
speed is set by a simple resistor divider on the V
MIN
input. An integrated Start-up Timer ensures reliable
motor start-up at turn-on, coming out of shutdown
mode or following a transient fault. A logic low applied
to V
(Pin 3) causes fan shutdown.
MIN
The TC642 also features Microchip Technology's pro-
prietary FanSense™ technology for increasing system
reliability. In normal fan operation, a pulse train is
present at SENSE (Pin 5). A missing pulse detector
monitors this pin during fan operation. A stalled, open
or unconnected fan causes the TC642 to trigger its
Start-up Timer once. If the fault persists, the FAULT
output goes low and the device is latched in its shut-
down mode. FAULT is also asserted if the PWM
reaches 100% duty cycle, indicating a possible thermal
runaway situation, although the fan continues to run.
See Section 5.0, “Typical Applications”, for more
information and system design guidelines.
Available Tools
• Fan Controller Demonstration Board (TC642DEMO)
• Fan Controller Evaluation Kit (TC642EV)
The TC642 is available in the standard 8-pin plastic
DIP, SOIC and MSOP packages and is available in the
commercial, extended commercial and industrial
temperature ranges.
2002 Microchip Technology Inc.
DS21444C-page 1