TC1412/TC1412N
2A High-Speed MOSFET Drivers
Features
General Description
• Latch-Up Protected: Withstands 500 mA Reverse
Current
The TC1412/TC1412N are 2A CMOS buffers/drivers.
They do not latch up under any conditions within their
power and voltage ratings. They are not subject to
damage when up to 5V of noise spiking of either
polarity occurs on the ground pin. They can accept,
without damage or logic upset, up to 500 mA of current
of either polarity being forced back into their output. All
terminals are fully protected against electrostatic
discharge (ESD) up to 2.0 kV (HBM) and 400V (MM).
• Input Withstands Negative Inputs Up to 5V
• Electrostatic Discharge (ESD) Protected: 2.0 kV
(HBM) and 400V (MM)
• High Peak Output Current: 2A
• Wide Input Supply Voltage Operating Range:
- 4.5V to 16V
• High Capacitive Load Drive Capability:
- 1000 pF in 18 ns
As MOSFET drivers, the TC1412/TC1412N can easily
charge a 1000 pF gate capacitance in 18 ns with
matched rise and fall times. To ensure that the
MOSFET’s intended state will not be affected even by
large transients, low enough impedance in both the ‘On’
and ‘Off’ states are provided. The leading and trailing
edge propagation delay times are also matched to allow
driving short-duration inputs with greater accuracy.
• Short Delay Time: 35 ns typical
• Matched Delay Times
• Low Supply Current:
-
-
With Logic ‘1’ Input: 500 µA
With Logic ‘0’ Input: 100 µA
• Low Output Impedance: 4
• Available in Space-Saving 8-pin MSOP Package
• Pinout – same as TC1410/TC1411/TC1413
Package Type
8-Pin MSOP/PDIP/SOIC
V
V
DD
Applications
8
7
1
V
1
8 V
DD
DD
DD
IN 2
OUT
IN 2
7 OUT
6 OUT
5 GND
• Switch Mode Power Supplies
• Pulse Transformer Drive
• Line Drivers
TC1412
TC1412N
NC 3
NC 3
6 OUT
5 GND
GND 4
GND 4
• Relay Driver
6,7
2
2
6,7
Inverting
Non-Inverting
NC = No Internal Connection
Note:
For proper operation, duplicate pins
must be connected together.
2001-2015 Microchip Technology Inc.
DS20001391E-page 1