PurePath Digital
TAS5615
www.ti.com ...................................................................................................................................................................................................... SLAS595–JUNE 2009
160 W STEREO/300W MONO PurePath™ HD Analog-Input Power Stage
1
FEATURES
DESCRIPTION
2
•
Active Enabled Integrated Feedback Provides:
(PurePath™ HD)
The TAS5615 is a high-performance analog input
CLass amplifier with integrated closed loop
D
–
Signal Bandwidth up to 80kHz for High
Frequency Content From High Definition
Sources
feedback technology (known as PurePath™ HD). It
has the ability to drive up to 160 W(1) Stereo into 8Ω
speakers from a single 50V supply.
–
–
Ultra Low 0.03% THD at 1W into 8Ω
PurePath™ HD technology enables traditional
AB-Amplifier performance (<0.03% THD) levels while
providing the power efficiency of traditional class D
amplifiers.
0.03% THD Across all Frequencies for
Natural Sound at 1W
–
–
–
–
80dB PSRR (BTL, No Input Signal)
>100dB (A weighted) SNR
Ultra Low 0.03% THD+N is flat across all frequencies,
ensuring that the amplifier doesn’t add uneven
distortion characteristics, and helps maintain a natural
sound.
Click and Pop Free Startup
Minimal External Components Compared to
Discrete Solutions
•
•
Multiple Configurations Possible on the Same
PCB:
The efficiency of this Class-D amplifier is greater than
90%. Undervoltage Protection, Overtemperature,
clipping, Short Circuit and Overcurrent Protection are
all integrated, safeguarding the device and speakers
against fault conditions that could damage the
system.
–
–
Mono Parallel Bridge Tied Load (PBTL)
2.1 Single Ended (SE) Stereo Pair and
Bridge Tied Load (BTL) Subwoofer
–
Quad Single Ended (SE) Outputs
Total Output Power at 10%THD+N
3 x OPA1632
–
–
–
300W in Mono PBTL Configuration
160W per Channel in Stereo BTL
80W per Channel in Quad Single Ended
??
PurePath HDTM
TAS5615
??
ANALOG
AUDIO
INPUT
TAS5630
(2.1 Configuration)
•
•
High Efficiency Power Stage (> 90%) With 120
mΩ Output MOSFETs
??
Two Thermally Enhanced Package Options:
15V
+12V
+25V to +50V
–
–
PHD (64-pin QFP)
PurePath HDTM
Class G Power Supply
Ref design
DKD (44-pin PSOP3)
•
•
Self-Protection Design (Including
Undervoltage, Overtemperature, Clipping, and
Short Circuit Protection) With Error Reporting
110VAC->240VAC
EMI Compliant When Used With
Recommended System Design
APPLICATIONS
•
•
•
•
Mini Combo System
AV Receivers
DVD Receivers
Active Speakers
(1) Achievable output power levels are dependent on the thermal
configuration of the target application. A high performance
thermal interface material between the package exposed
heatslug and the heat sink should be used to achieve high
output power levels
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2009, Texas Instruments Incorporated