PurePath Digital
TAS5615
www.ti.com
SLAS595B –JUNE 2009–REVISED FEBRUARY 2010
160 W STEREO/300W MONO PurePath™ HD Analog-Input Power Stage
Check for Samples: TAS5615
1
FEATURES
DESCRIPTION
23
•
Active Enabled Integrated Feedback Provides:
(PurePath™ HD Technology)
The TAS5615 is a high-performance analog input
class-D amplifier with integrated closed-loop
feedback technology (known as PurePath™ HD
technology). It has the ability to drive up to 160
W(1) stereo into 8-Ω speakers from a single 50-V
supply.
–
Signal Bandwidth up to 80 kHz for
High-Frequency Content From
High-Definition Sources
–
–
Ultralow 0.03% THD at 1 W into 8 Ω
0.03% THD Across All Frequencies for
Natural Sound at 1 W
PurePath HD technology enables traditional
AB-amplifier performance (<0.03% THD) levels while
providing the power efficiency of traditional class-D
amplifiers.
–
–
–
–
80-dB PSRR (BTL, No Input Signal)
>100-dB (A weighted) SNR
Click- and Pop-Free Start-Up
Ultralow 0.03% THD+N is flat across all frequencies,
ensuring that the amplifier does not add uneven
distortion characteristics, and helps maintain a natural
sound.
Minimal External Components Compared to
Discrete Solutions
•
Multiple Configurations Possible on the Same
PCB:
The efficiency of this class-D amplifier is greater than
90%. Undervoltage protection, overtemperature,
clipping, short-circuit and overcurrent protection are
all integrated, safeguarding the device and speakers
against fault conditions that could damage the
system.
–
–
Mono Parallel Bridge-Tied Load (PBTL)
2.1 Single-Ended (SE) Stereo Pair and
Bridge-Tied Load (BTL) Subwoofer
–
Quad Single-Ended (SE) Outputs
•
Total Output Power at 10% THD+N
3 ´ OPA1632
–
–
–
300 W in Mono PBTL Configuration
160 W per Channel in Stereo BTL
80 W per Channel in Quad Single-Ended
♫♪
PurePathTM HD
ANALOG
TAS5615
AUDIO
♫♪
INPUT
(2.1 Configuration)
•
•
High Efficiency Power Stage (> 90%) With 120
mΩ Output MOSFETs
♫♪
±15 V
12 V
25 V–50 V
Two Thermally Enhanced Package Options:
–
–
PHD (64-Pin QFP)
PurePathTM HD
Class-G Power Supply
Ref. Design
DKD (44-Pin PSOP3)
•
•
Self-Protection Design (Including
Undervoltage, Overtemperature, Clipping, and
Short-Circuit Protection) With Error Reporting
110 VAC ® 240 VAC
EMI Compliant When Used With
Recommended System Design
APPLICATIONS
•
•
•
•
Mini Combo System
AV Receivers
DVD Receivers
Active Speakers
(1) Achievable output power levels are dependent on the thermal
configuration of the target application. A high performance
thermal interface material between the package exposed
heatslug and the heat sink should be used to achieve high
output power levels
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
3
PurePath HD is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2009–2010, Texas Instruments Incorporated