TAS5616
www.ti.com
SLAS596B –JUNE 2009–REVISED JANUARY 2010
160-W STEREO / 300-W MONO PurePath™ HD DIGITAL-INPUT POWER STAGE
Check for Samples: TAS5616
1
FEATURES
APPLICATIONS
•
•
•
•
Mini Combo System
AV Receivers
DVD Receivers
Active Speakers
23
•
PurePath™ HD Enabled Integrated Feedback
Provides:
–
Signal Bandwidth up to 80 kHz for
High-Frequency Content From HD Sources
–
–
Ultralow 0.03% THD at 1 W into 8 Ω
DESCRIPTION
Flat THD at All Frequencies for Natural
Sound
The TAS5616 is a high-performance PWM-input
class-D amplifier with integrated closed-loop
feedback technology (known as PurePath™ HD
technology). It has the ability to drive up to 160-W
–
–
–
–
80-dB PSRR (BTL, No Input Signal)
>100-dB (A-weighted) SNR
(1)
Click- and Pop-Free Startup
stereo into 8-Ω speakers from a single 50-V
supply.
Minimal External Components Compared to
Discrete Solutions
PurePath™ HD technology enables traditional
AB-amplifier performance (<0.03% THD) levels while
providing the power efficiency of traditional class-D
amplifiers.
•
•
Multiple Configurations Possible on the Same
PCB With Stuffing Options:
–
–
–
Mono Parallel Bridge-Tied Load (PBTL)
Stereo Bridge-Tied Load (BTL)
Ultralow 0.03% THD+N is flat across all frequencies,
ensuring that the amplifier does not add uneven
distortion characteristics, and helps maintain a natural
sound.
2.1 Single-Ended Stereo Pair and
Bridge-Tied Load Subwoofer
–
Quad Single-Ended Outputs
The efficiency of this class-D amplifier is greater than
90%. Undervoltage protection, overtemperature,
clipping, short-circuit and overcurrent protection are
all integrated, safeguarding the device and speakers
against fault conditions that could damage the
system. PurePath HD™
Total Output Power at 10% THD+N
–
–
330 W in Mono PBTL Configuration
160 W per Channel in Stereo BTL
Configuration
–
80 W per Channel in Quad Single-Ended
Configuration
♫♪
ANALOG
AUDIO
INPUT
•
•
High-Efficiency Power Stage (>90%) With
120-mΩ Output MOSFETs
PurePathTM HD
TAS5616
TAS3308
Digital Audio
Processor
♫♪
♫♪
TAS5630
(2.1 Configuration)
DIGITAL
AUDIO
INPUT
With Analog Interface
Two Thermally Enhanced Package Options:
–
–
PHD (64-Pin QFP)
12 V
25 V–50 V
DKD (44-Pin PSOP3)
•
•
Self-Protection Design (Including
Undervoltage, Overtemperature, Clipping, and
Short-Circuit Protection) With Error Reporting
PurePathTM HD
Power Supply
Ref. Design
+3.3V
REG.
EMI Compliant When Used With
Recommended System Design
110 VAC®240 VAC
(1) Achievable output power levels are dependent on the thermal
configuration of the target application. A high performance
thermal interface material between the package exposed
thermal pad and the heat sink should be used to achieve high
output power levels.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
3
PurePath HD is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2009–2010, Texas Instruments Incorporated