T18
Vishay
www.vishay.com
Wet Tantalum Capacitors, Ultra High Capacitance, Tantalum-Case
with Glass-to-Tantalum Hermetic Seal for -55 °C to +125 °C
FEATURES
• Enhanced performance, high reliability design
• Terminations: axial, standard tin / lead (SnPb),
Available
100 ꢀ tin available
Available
• Model
T18
tantalum-case
electrolytic
capacitors provide all the advantages of
Vishay’s SuperTan® series devices, while
offering improved reverse voltage and
vibration capability
Available
PERFORMANCE CHARACTERISTICS
Refer to: Typical Performance Characteristics
• Increased thermal shock capability of 300 cycles
• Designed for the avionics and aerospace applications
Operating Temperature: -55 °C to +85 °C
(to +125 °C with voltage derating)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Capacitance Tolerance: 10 ꢀ, 20 ꢀ standard
Note
DC Leakage Current (DCL Max.): at +25 °C and above:
leakage current shall not exceed the values listed in the
Standard Ratings table.
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
ORDERING INFORMATION
T18
D
108
M
075
E
Z
S
S
MODEL CASE CAPACITANCE CAPACITANCE DC VOLTAGE RATING
TERMINATION
AND PACKAGING
RELIABILITY /
SHOCK /
VIBRATION LEVEL
INSULATING
SLEEVE
ESR
CODE
TOLERANCE
AT +85 °C
See
This is
K = 10 ꢀ
M = 20 ꢀ
This is expressed in
volts. To complete the
three-digit block,
zeros precede the
voltage rating
E = tin / lead, bulk,
standard
C = 100 ꢀ tin, bulk
Z = standard
G = medium
S = sleeved
S =
Ratings expressed in
U = unsleeved standard
L = low
and
Case
Codes
table
picofarads. The
first two digits
are the
significant
figures. The
third is the
number of
zeros to follow
Note
•
Packaging: the use of formed plastic trays for packing bulk components is standard.
DIMENSIONS in inches [millimeters]
D
E
L1
E
0.0253 0.002 [0.64 0.05] dia.
(no. 22 AWG) tinned nickel leads
solderable and weldable
Weld
Tantalum
L2
CASE CODE
L2
(max.)
WEIGHT (g)
(max.)
D
L1
E
TYPE T18
ST
0.188 0.016
[4.78 0.41]
0.281 0.016
[7.14 0.41]
0.375 0.016
[9.52 0.41]
0.375 0.016
[9.52 0.41]
0.453 + 0.031 / - 0.016
[11.51 + 0.79 / - 0.41]
0.641 + 0.031 / - 0.016
[16.28 + 0.79 / - 0.41]
0.766 + 0.031 / - 0.016
[19.46 + 0.79 / - 0.41]
1.062 + 0.031 / - 0.016
[26.97 + 0.79 / - 0.41]
1.500 0.250
[38.10 6.35]
2.250 0.250
[57.15 6.35]
2.250 0.250
[57.15 6.35]
2.250 0.250
[57.15 6.35]
A
B
C
D
T1
0.734 [18.64]
0.922 [23.42]
1.047 [26.59]
1.343 [34.11]
2.6
6.2
T2
T3
T4
11.6
17.7
Note
For insulated parts, add 0.015" [0.38 mm] to the diameter. The insulation shall lap over the ends of the capacitor body.
•
Revision: 04-Dec-17
Document Number: 40161
1
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000