Preliminary Specifications
GaAs SPST Single Positive Control Matched Switch
0.5 - 1.5 GHz
SW-349
V3.00
Features
SO-8
●
Single Supply Voltage +3 V to +5 V
PIN 8
.2284-.2440
●
.1497-.1574
(3.80-4.00)
- B -
Single Control +3 V to +5 V
(5.80-6.20)
Orientation
mark
.010(0.25) M B M
●
Matched Input and Output
●
Low Distortion 47 dBm IP @ 0.5 GHz with +5 V
3
PIN 1
●
.0099-0.0196
x 45° Chamfer
(0.25-0.50)
Low Power Consumption <10 mA @ 5 V typ.
.1890-.1968
(4.80-5.00)
- A -
.0532-.0688
(1.35-1.75)
●
Low Cost Plastic SOIC-8 Package
0°-8°
- C -
.004 (0.10)
.016-.050
Description
.0040-.0098
(0.10-0.25)
(0.40-1.27)
.0075-0.0098
(0.19-0.25)
The SW-349 is a GaAs MMIC matched SPST switch in a low
cost plastic SOIC 8-lead package. This switch is designed
for high isolation from 0.5-1.5 GHz, with typical isolation
greater than 40 dB @ 0.9 GHz. The SW-349 requires exter-
nal DC blocks on the RF ports. The SW-349 is ideally suited
for applications where very low power consumption (<10
mA @ 5 V) and low intermodulation products are required.
Typical applications include switching and blanking for
radio and cellular equipment, wireless LANs, GPS equip-
ment and other RF control circuits.
.013-.020 TYP.
(0.33-0.51)
.050(1.27) BSC.
.010(0.25) M C A M B S
8- Lead SOP outline dimensions
Narrow body .150
(All dimensions per JEDEC No. MS-012-AA, Issue C)
Dimensions in ( ) are in mm.
Unless Otherwise Noted: .xxx = ± 0.010 (.xx = ± 0.25)
.xx = ± 0.02 (.x = ±0.5)
Ordering Information
Part Number
SW-349 PIN
SW-349TR
Package
SOIC 8-Lead Plastic
Foward Tape & Reel
The SW-349 is fabricated with a GaAs MMIC using a mature
1-micron process. The process features full chip passivation
for increased performance and reliability.
*
*
SW-349RTR
Reverse Tape & Reel
*If specific reel size is required, consult factory for part number
assignment.
Electrical Specifications, TA= +25°C
Parameter
Insertion Loss
Isolation
Test Conditions1
Units
Min.
Typ.
Max.
500-1500 MHz
dB
0.9
1.2
500 - 1500 MHz
750 - 960 MHz
dB
dB
20
35
38
500 - 750 MHz
750 - 960 MHz
960 - 1500 MHz
1.5:1
1.3:1
1.2:1
1.7:1
1.4:1
1.3:1
VSWR
Trise, Tfall
Ton , Toff
Transients
10%-90% RF, 90% - 10% RF
50% Control to 90% RF, 50% Control to 10% RF
In Band
µS
µS
mV
1
2
20
1 dB Compression
Vctl = +5 V
Vctl = +3 V
500 MHz
500 MHz
dBm
dBm
26
20
Input IP
3
Vctl = +5 V2
dBm
dBm
47
44
Vctl = +3 V2
Input IP
2
Vctl = +5 V2
Vctl = +3 V2
dBm
dBm
60
56
1. All measurements are in a 50 ohm system. DC blocks are required on RF1 and RF2. Vin Low = 0V ±0.2V, Vin High = VS ±0.2V, VS = +3 to +5V.
For inputs under 20 dBm, hot switching can be used.
2. Two tone +5 dBm each (+8 dBm total) F1 = 900 MHz, F2 = 900.05 MHz.
Specifications Subject to Change Without Notice.
M/A-COM, Inc.
1
North America: Tel. (800) 366-2266
Fax (800) 618-8883
■
Asia/Pacific: Tel. +81 3 3263 8761
Fax +81 3 3263 8769
■
Europe: Tel. +44 (1344) 869 595
Fax +44 (1344) 300 020