GaAs SPDT Switch
DC-2 GHz
SW-224/225
Features
TO-5-3
●
0.36 DIA.
(9.14 ± 0.5)
Low Insertion Loss, 0.5 dB Typical
Integral TTL Driver
Low DC Power Consumption
PIN 8
0.200 MAX
(5.08)
●
0.018 ± 0.005
(0.46 ± 0.13)
PIN 1
●
0.500 MIN
(12.7)
Guaranteed Specifications *
(From -55°C to +85°C)
BOTTOM
VIEW
Frequency Range
DC-2 GHz
Pins Equally Spaced
Insertion Loss
VSWR
DC-2 GHz
DC-1 GHz
DC-0.5 GHz
DC-2 GHz
DC-1 GHz
DC-0.5 GHz
DC-2 GHz
DC-1 GHz
DC-0.5 GHz
0.8 dB Max
0.7 dB Max
0.7 dB Max
1.5:1 Max
1.25:1 Max
1.15:1 Max
30 dB Min
35 dB Min
40 dB Min
On 0.230 DIA (5.84) BC
Located As Shown
Bottom of Case is AC Ground.
Dimensions in ( ) are in mm.
Unless Otherwise Noted:.xxx = ± 0.010 (.xx = ± 0.25)
.xx = ± 0.02 (.x = ± 0.5)
WEIGHT (APPROX.): 0.025 OUNCES 0.7 GRAMS
Isolation
0.375 ±0.020
(9.52 ±0.5)
FP-13
Operating Characteristics
Impedance
0.015 DIA ±0.005
(0.38 ±0.13)
6 PLACES
PUNCH
MARK
50 Ohms Nominal
PIN 1
Switching Characteristics†
Trise, Tfall
PIN 2
PIN 3
10 ns Typ
150 ns Typ
15 mV Typ
Ton, Toff (50% CTL to 90/10% RF)
Transients (In-Band)
Input Power for 1 dB Compression
0.5-2 GHz
0.05 GHz
+27 dBm Typ
+21 dBm Typ
0.375 ±0.020
(9.52 ±0.5)
Intermodulation Intercept Point
(for two-tone input power up to +13 dBm)
Intercept Points
IP2
IP3
PIN 6
PIN 5
0.312 MIN TYP
(792)
0.5-2 GHz
0.05 GHz
+68
+62
+46
+40
dBm Typ
dBm Typ
Bias Power
+5 VDC @ 1 mA Max
-5 VDC @ 1 mA Max
0.050
(1.27)
0.088
(2.24)
PIN 4
Environmental
See Appendix for MIL-STD-883 screening option.
0.100
(2.54)
0.125 MAX
(3.17)
0.200
(5.08)
All specifications apply when operated with bias voltages of +5 VDC
and -5 VDC and 50 ohm impedance at all RF ports.
*
Dimensions in ( ) are in mm.
Unless Otherwise Noted:.xxx = ± 0.010 (.xx = ± 0.25)
.xx = ± 0.02 (.x = ± 0.5)
Ordering Information
Model No.
SW-224 PIN
SW-225 PIN
Package
TO-5-3
Flatpack
Specifications Subject to Change Without Notice.
V2.01
M/A-COM, Inc.
■
1011 Pawtucket Boulevard, Lowell, MA 01853 USA
■
Telephone: 800-366-2266