5秒后页面跳转
SSM2356CBZ-REEL7 PDF预览

SSM2356CBZ-REEL7

更新时间: 2024-11-03 06:14:23
品牌 Logo 应用领域
亚德诺 - ADI 消费电路商用集成电路音频放大器视频放大器
页数 文件大小 规格书
16页 634K
描述
2 × 2W Filterless Class-D Stereo Audio Amplifier

SSM2356CBZ-REEL7 数据手册

 浏览型号SSM2356CBZ-REEL7的Datasheet PDF文件第2页浏览型号SSM2356CBZ-REEL7的Datasheet PDF文件第3页浏览型号SSM2356CBZ-REEL7的Datasheet PDF文件第4页浏览型号SSM2356CBZ-REEL7的Datasheet PDF文件第5页浏览型号SSM2356CBZ-REEL7的Datasheet PDF文件第6页浏览型号SSM2356CBZ-REEL7的Datasheet PDF文件第7页 
2 × 2W Filterless Class-D  
Stereo Audio Amplifier  
SSM2356  
The SSM2356 features a high efficiency, low noise modulation  
scheme that requires no external LC output filters. The modulation  
continues to provide high efficiency even at low output power.  
It operates with 92% efficiency at 1.4 W into 8 Ω or 85% efficiency  
at 2.0 W into 4 Ω from a 5.0 V supply and has an SNR of >103 dB.  
FEATURES  
Filterless stereo Class-D amplifier with Σ-Δ modulation  
No sync necessary when using multiple Class-D amplifiers  
from Analog Devices, Inc.  
2 × 2W into 4 Ω load and 2x1.4 W into 8 Ω load at 5.0 V  
supply with <1% total harmonic distortion (THD + N)  
92% efficiency at 5.0 V, 1.4 W into 8 Ω speaker  
>103 dB signal-to-noise ratio (SNR)  
Single-supply operation from 2.5 V to 5.5 V  
20 nA shutdown current; left/right channel control  
Short-circuit and thermal protection  
Spread-spectrum pulse density modulation is used to provide  
lower EMI-radiated emissions compared with other Class-D  
architectures. The SSM2356 includes an optional modulation  
select pin (ultralow EMI emission mode) that significantly  
reduces the radiated emissions at the Class-D outputs, particularly  
above 100 MHz.  
Available in a 16-ball, 1.66 mm × 1.66 mm WLCSP  
Pop-and-click suppression  
Built-in resistors that reduce board component count  
User-selectable 6 dB or 18 dB gain setting  
User-selectable ultralow EMI emission mode  
The SSM2356 has a micropower shutdown mode with a typical  
shutdown current of 20 nA. Shutdown is enabled by applying  
a logic low to the  
and  
pins. The device also  
SDNR  
SDNL  
includes pop-and-click suppression circuitry that minimizes  
voltage glitches at the output during turn-on and turn-off,  
reducing audible noise on activation and deactivation.  
APPLICATIONS  
Mobile phones  
MP3 players  
Portable gaming  
Portable electronics  
The fully differential input of the SSM2356 provides excellent  
rejection of common-mode noise on the input. Input coupling  
capacitors can be omitted if the dc input common-mode voltage  
is approximately VDD/2. The preset gain of SSM2356 can be  
selected between 6 dB and 18 dB with no external components  
and no change to the input impedance. Gain can be further  
reduced to a user-defined setting by inserting series external  
resistors at the inputs.  
GENERAL DESCRIPTION  
The SSM2356 is a fully integrated, high efficiency, stereo Class-D  
audio amplifier. It is designed to maximize performance for  
mobile phone applications. The application circuit requires  
a minimum of external components and operates from a single  
2.5 V to 5.5 V supply. It is capable of delivering 2 × 2W of contin-  
uous output power with <1% THD + N driving a 4 Ω load from a  
5.0 V supply.  
The SSM2356 is specified over the commercial temperature range  
(−40°C to +85°C). It has built-in thermal shutdown and output  
short-circuit protection. It is available in a 16-ball, 1.66 mm ×  
1.66 mm wafer level chip scale package (WLCSP).  
FUNCTIONAL BLOCK DIAGRAM  
VBATT  
2.5V TO 5.5V  
10µF  
0.1µF  
VDD  
VDD  
SSM2356  
1
1
22nF  
22nF  
80k  
OUTR+  
RIGHT IN+  
RIGHT IN–  
GAIN  
CONTROL  
FET  
DRIVER  
MODULATOR  
INR+  
OUTR–  
(Σ-Δ)  
INR–  
80kΩ  
EMISSION  
CTRL  
BIAS  
BIAS  
SHUTDOWN–R  
SHUTDOWN–L  
EDGE  
INTERNAL  
OSCILLATOR  
EDGE  
SDNR  
SDNL  
CONTROL  
1
1
22nF  
22nF  
80kΩ  
80kΩ  
OUTL+  
OUTL–  
LEFT IN+  
LEFT IN–  
GAIN  
CONTROL  
FET  
DRIVER  
MODULATOR  
(Σ-Δ)  
INL+  
INL–  
GAIN  
GND  
GND  
GAIN  
INPUT CAPS ARE OPTIONAL IF INPUT DC COMMON-MODE  
VOLTAGE IS APPROXIMATELY V /2.  
GAIN = 6dB OR 18dB  
1
DD  
Figure 1.  
Rev. 0  
Information furnished by Analog Devices is believed to be accurate and reliable. However, no  
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other  
rights of third parties that may result from its use. Specifications subject to change without notice. No  
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.  
Trademarks and registeredtrademarks arethe property of their respective owners.  
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.  
Tel: 781.329.4700  
Fax: 781.461.3113  
www.analog.com  
©2009 Analog Devices, Inc. All rights reserved.  
 

与SSM2356CBZ-REEL7相关器件

型号 品牌 获取价格 描述 数据表
SSM2356CBZ-RL ADI

获取价格

2 x 2W Filterless Class-D Stereo Audio Amplifier
SSM2356CBZ-RL7 ADI

获取价格

2 x 2W Filterless Class-D Stereo Audio Amplifier
SSM2375 ADI

获取价格

Filterless High Efficiency Mono 3 W Class-D Audio Amplifier
SSM2375CBZ-REEL ADI

获取价格

Filterless High Efficiency Mono 3 W Class-D Audio Amplifier
SSM2375CBZ-REEL7 ADI

获取价格

Filterless High Efficiency Mono 3 W Class-D Audio Amplifier
SSM2377 ADI

获取价格

Filterless, High Efficiency, Mono 2.5 W Class-D Audio Amplifier Pop-and-click suppression
SSM2377ACBZ-R7 ADI

获取价格

Filterless, High Efficiency, Mono 2.5 W Class-D Audio Amplifier Pop-and-click suppression
SSM2377ACBZ-RL ADI

获取价格

Filterless, High Efficiency, Mono 2.5 W Class-D Audio Amplifier Pop-and-click suppression
SSM2380 ADI

获取价格

Filterless, Stereo, Class-D Audio Amplifier
SSM2380CBZ-REEL ADI

获取价格

2 x 2 W, Filterless, Stereo, Class-D Audio Amplifier with ALC + I2C