5秒后页面跳转
SSM2375CBZ-REEL7 PDF预览

SSM2375CBZ-REEL7

更新时间: 2024-11-29 19:59:31
品牌 Logo 应用领域
亚德诺 - ADI 放大器商用集成电路
页数 文件大小 规格书
17页 430K
描述
Filterless High Efficiency Mono 3 W Class-D Audio Amplifier

SSM2375CBZ-REEL7 数据手册

 浏览型号SSM2375CBZ-REEL7的Datasheet PDF文件第2页浏览型号SSM2375CBZ-REEL7的Datasheet PDF文件第3页浏览型号SSM2375CBZ-REEL7的Datasheet PDF文件第4页浏览型号SSM2375CBZ-REEL7的Datasheet PDF文件第5页浏览型号SSM2375CBZ-REEL7的Datasheet PDF文件第6页浏览型号SSM2375CBZ-REEL7的Datasheet PDF文件第7页 
Filterless, High Efficiency,  
Mono 3 W Class-D Audio Amplifier  
SSM2375  
Data Sheet  
Spread-spectrum pulse density modulation (PDM) is used to  
provide lower EMI-radiated emissions compared with other  
Class-D architectures. The inherent randomized nature of  
spread-spectrum PDM eliminates the clock intermodulation  
(beating effect) of several amplifiers in close proximity.  
FEATURES  
Filterless Class-D amplifier with spread-spectrum  
Σ-Δ modulation  
3 W into 3 Ω load and 1.4 W into 8 Ω load at 5.0 V supply  
with <1% total harmonic distortion (THD + N)  
93% efficiency at 5.0 V, 1.4 W into 8 Ω speaker  
>100 dB signal-to-noise ratio (SNR)  
High PSSR at 217 Hz: 80 dB  
Flexible gain adjustment pin: 0 dB to 12 dB in 3 dB steps  
Fixed input impedance: 80 kΩ  
User-selectable ultralow EMI emissions mode  
Single-supply operation from 2.5 V to 5.5 V  
20 nA shutdown current  
The SSM2375 includes an optional modulation select pin  
(ultralow EMI emissions mode) that significantly reduces the  
radiated emissions at the Class-D outputs, particularly above  
100 MHz. In ultralow EMI emissions mode, the SSM2375  
can pass FCC Class B radiated emission testing with 50 cm,  
unshielded speaker cable without any external filtering.  
The device also includes a highly flexible gain select pin that  
allows the user to select a gain of 0 dB, 3 dB, 6 dB, 9 dB, or  
12 dB. The gain selection feature improves gain matching  
between multiple SSM2375 devices within a single application  
as compared to using external resistors to set the gain.  
Short-circuit and thermal protection with autorecovery  
Available in 9-ball, 1.5 mm × 1.5 mm WLCSP  
Pop-and-click suppression  
APPLICATIONS  
Mobile phones  
MP3 players  
The SSM2375 has a micropower shutdown mode with a typical  
shutdown current of 20 nA. Shutdown is enabled by applying  
SD  
a logic low to the  
pin.  
Portable electronics  
The device also includes pop-and-click suppression circuitry.  
This suppression circuitry minimizes voltage glitches at the  
output during turn-on and turn-off, reducing audible noise  
on activation and deactivation.  
GENERAL DESCRIPTION  
The SSM2375 is a fully integrated, high efficiency, Class-D audio  
amplifier. It is designed to maximize performance for mobile  
phone applications. The application circuit requires a minimum  
of external components and operates from a single 2.5 V to 5.5 V  
supply. It is capable of delivering 3 W of continuous output power  
with <1% THD + N driving a 3 Ω load from a 5.0 V supply.  
Other features that simplify system-level integration of the  
SSM2375 include input low-pass filtering to suppress out-of-band  
DAC noise interference to the PDM modulator and fixed-input  
impedance to simplify component selection across multiple  
platform production builds.  
The SSM2375 features a high efficiency, low noise modulation  
scheme that requires no external LC output filters. The modulation  
continues to provide high efficiency even at low output power.  
The SSM2375 operates with 93% efficiency at 1.4 W into 8 Ω  
or with 85% efficiency at 3 W into 3 Ω from a 5.0 V supply and  
has an SNR of >100 dB.  
The SSM2375 is specified over the industrial temperature range  
of −40°C to +85°C. It has built-in thermal shutdown and output  
short-circuit protection. It is available in a halide-free, 9-ball,  
1.5 mm × 1.5 mm wafer level chip scale package (WLCSP).  
FUNCTIONAL BLOCK DIAGRAM  
POWER SUPPLY  
2.5V TO 5.5V  
10µF  
0.1µF  
VDD  
SSM2375  
22nF  
OUT+  
IN+  
IN–  
GAIN  
CONTROL  
FET  
DRIVER  
MODULATOR  
IN+  
IN–  
OUT–  
(Σ-Δ)  
22nF  
EDGE  
GND  
INTERNAL  
OSCILLATOR  
EDGE  
CONTROL  
EMISSION  
CONTROL  
BIAS  
SHUTDOWN  
SD  
GAIN  
R
GAIN  
GAIN SELECT  
GAIN = 0dB, 3dB, 6dB, 9dB, OR 12dB  
Figure 1.  
Rev. A  
Document Feedback  
Information furnished by Analog Devices is believed to be accurate and reliable. However, no  
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other  
rightsof third parties that may result fromits use. Specifications subject to change without notice. No  
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.  
Trademarks andregisteredtrademarks are the property of their respective owners.  
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.  
Tel: 781.329.4700 ©2010–2013 Analog Devices, Inc. All rights reserved.  
Technical Support  
www.analog.com  
 
 
 
 

SSM2375CBZ-REEL7 替代型号

型号 品牌 替代类型 描述 数据表
SSM2375CBZ-REEL ADI

完全替代

Filterless High Efficiency Mono 3 W Class-D Audio Amplifier
SSM2319CBZ-R2 ADI

完全替代

Filterless, High Efficiency, Mono 3 W Class-D Audio Amplifier
SSM2319CBZ-REEL ADI

类似代替

Filterless, High Efficiency, Mono 3 W Class-D Audio Amplifier

与SSM2375CBZ-REEL7相关器件

型号 品牌 获取价格 描述 数据表
SSM2377 ADI

获取价格

Filterless, High Efficiency, Mono 2.5 W Class-D Audio Amplifier Pop-and-click suppression
SSM2377ACBZ-R7 ADI

获取价格

Filterless, High Efficiency, Mono 2.5 W Class-D Audio Amplifier Pop-and-click suppression
SSM2377ACBZ-RL ADI

获取价格

Filterless, High Efficiency, Mono 2.5 W Class-D Audio Amplifier Pop-and-click suppression
SSM2380 ADI

获取价格

Filterless, Stereo, Class-D Audio Amplifier
SSM2380CBZ-REEL ADI

获取价格

2 x 2 W, Filterless, Stereo, Class-D Audio Amplifier with ALC + I2C
SSM2380CBZ-REEL7 ADI

获取价格

2 x 2 W, Filterless, Stereo, Class-D Audio Amplifier with ALC + I2C
SSM23LPT CHENMKO

获取价格

SCHOTTKY BARRIER RECTIFIER
SSM23PT CHENMKO

获取价格

SCHOTTKY BARRIER RECTIFIER
SSM2402 ADI

获取价格

Dual Audio Analog Switches
SSM-2402 ADI

获取价格

Dual Audio Analog Switches