SSA-EB Series Lighted Emergency Stop Push
Button
Datasheet
Illuminated 30 mm Mount Electro-mechanical Push Buttons
•
•
•
Rugged design; easy installation with no assembly or individual wiring required
Push-to-stop, twist-to-release, or pull-to-release operation per EN 60947-5-5
Models with the washdown cover are push-to-stop and pull-to-release operation per EN
60947-5-5
•
•
•
Latching design complies with ISO 13850; direct (positive) opening operation per EN
60947-5-1
Compliant with ANSI B11.19, ANSI NFPA79, and IEC/EN 60204-1 Emergency Stop
requirements
“Safe Break Action” ensures N.C. contacts will open if the contact block is separated
from the actuator
•
•
8-pin M12/Euro-style quick disconnect
Models with YELLOW and RED indication of actuation (armed or depressed/latched
button)
•
•
•
"Emergency Stop" legend included
U.S. Patent No. Des. 700,149
FDA-grade silicone cover withstands high pressure, high temperature washdown, and
®
increases the product rating to IEC IP69; the cover is ECOLAB certified to withstand
aggressive cleaning procedures with chemicals used in the food processing industry
Models SSA-EB… series are "mushroom-style" electro-mechanical emergency stop push buttons. When the button is armed, the
switch's safety contacts (N.C.) are closed and its monitoring contacts (N.O.), if present, are open. When the button is pushed, the
switch's safety contacts open, and the monitoring contacts close. The contacts remain in this condition until the push button is
manually rearmed by pulling or twisting clockwise the red push button actuator.
The SSA-EB1PL and -EB2PL..-..ECQ.. series has a 30 mm mounting base similar to Banner’s OTB, VTB, and STB Optical Touch
®
Buttons for ease of mounting without requiring an additional enclosure. The EZ-LIGHT illumination logic allows for easy
identification of a pushed/actuated button. An armed button is either a steady yellow illumination or OFF, a pushed/actuated button
is indicated by a red flashing illumination. An optional input allows an armed button to illuminate a steady red to indicate a machine
stop or emergency stop condition.
Models
®
Model
Push Button
EZ-LIGHT Illumination Logic
Connection
SSA-EB1PL-12ECQ8
SSA-EB1PLXR-12ECQ8
SSA-EB1PLYR-12ECQ8
SSA-EB1PLGR-12ECQ8
SSA-EB2PLXR-12ECQ8
OFF (armed), RED (solid, PUSH)
OFF (armed), RED (flash, PUSH)
YELLOW (armed), RED (flash, PUSH)
GREEN (armed), RED (flash, PUSH)
OFF (armed), RED (flash, PUSH)
Standard 40 mm
Large 60 mm
8-pin M12/Euro-style quick
disconnect
Washdown Cover Model
SSA-EB1P-ECWC
For Push Button Models
Standard 40 mm
Description
FDA-grade silicone cover
To order a model with the washdown cover installed, add "-WC" to the model number. For example, SSA-EB1PLYR-12ECQ8-WC.
Important... Read this before proceeding!
The user is responsible for satisfying all local, state, and national laws, rules, codes, and regulations relating to the use of this
product and its application. Banner Engineering Corp. has made every effort to provide complete application, installation,
operation, and maintenance instructions. Please contact a Banner Applications Engineer with any questions regarding this product.
The user is responsible for making sure that all machine operators, maintenance personnel, electricians, and supervisors are
thoroughly familiar with and understand all instructions regarding the installation, maintenance, and use of this product, and with
the machinery it controls. The user and any personnel involved with the installation and use of this product must be thoroughly
Original Document
162754 Rev. H
6 June 2018
162754