SSA-EB Series Emergency Stop Buttons
Datasheet
•
•
•
•
Push-to-stop, twist-to-release operation
Rugged, modular design; easy assembly and installation
Kits available for easy selection
Choice of metal base with or without enclosure; all kits include disc label with “Emergency
Stop” legend
•
•
Choice of normally closed (safety) or combination normally closed/normally open (non
safety) contacts
Latching design complies with ISO 13850; direct (positive) opening operation per IEC
60947-5-1
WARNING: Not a Safeguarding Device
An Emergency Stop Device is not considered a safeguarding device because it requires an overt action by an
individual to stop machine motion or hazards.
A safeguarding device limits or eliminates an individual's exposure to a hazard without action by the individual
or others. Because an individual must actuate the device for it to function, these devices do not fit the definition
of a safeguarding device and cannot be substituted for required safeguarding. Refer to the relevant standards
to determine those requirements.
Models
Models
Contacts
Enclosure Included
SSA-EBM-02L
SSA-EBM-11L
2 normally closed
1 normally closed and 1 normally open
No
SSA-EBM-12L
2 normally closed and 1 normally open
SSA-EBM-02E
SSA-EBM-11E
2 normally closed
1 normally closed and 1 normally open
Yes
SSA-EBM-12E
2 normally closed and 1 normally open
Important -- Read This First!
The user is responsible for satisfying all local, state, and national laws, rules, codes, and regulations relating to the use of this
product and its application. Banner Engineering Corp. has made every effort to provide complete application, installation,
operation, and maintenance instructions. Please contact a Banner Applications Engineer with any questions regarding this product.
The user is responsible for making sure that all machine operators, maintenance personnel, electricians, and supervisors are
thoroughly familiar with and understand all instructions regarding the installation, maintenance, and use of this product, and with
the machinery it controls. The user and any personnel involved with the installation and use of this product must be thoroughly
familiar with all applicable standards, some of which are listed within the specifications. Banner Engineering Corp. makes no claim
regarding a specific recommendation of any organization, the accuracy or effectiveness of any information provided, or the
appropriateness of the provided information for a specific application.
Original Document
111880 Rev. B
28 September 2018
111880