1
Optoway
SPE-7100G
***********************************************************************************************************************************************************************
SPE-7100(A)G / SPE-7101(A)G / SPE-7100(A)-SG / SPE-7101(A)-SG
(RoHS Compliant)
3.3V / 1.25 Gb/S / 100m / SFP RJ-45 COPPER TRANSCEIVER
***********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
Hot-pluggable SFP Footprint
The Copper SFP Transceiver 10/100/1000Base-T or
1000Base-T only SFP Copper Transceiver is high
performance, cost effective module, compliant with the
Gigabit Ethernet and 1000BASE-T standards as specified
in IEEE 802.3-2002 and IEEE 802.3ab, which supports
1000Mb/s data-rate up to 100 meters reach over
twisted-pair category 5 cable. With the hot plug ability,
the module offers a flexible and easy way to be installed
into SFP MSA compliant ports at any time without the
interruption of the host equipment operating online.
The Copper SFP Transceiver supports 1000Mb/s full
duplex data-links with 5-level Pulse Amplitude
Modulation (PAM) signals. All four pairs in the cable are
used with symbol rate at 250Mb/s on each pair.
Fully Metallic Enclosure for Low EMI
Low Power Dissipation
Compact RJ-45 Connector Assembly
Detailed Product Information in EEPROM
+3.3V Single Power Supply
Access to Physical Layer IC via 2-wire Serial Bus
10/100/1000 BASE-T with SGMII Interface
Auto sense MDI/MDIX
Compliant with SFP MSA
Compliant with IEEE Std 802.3-2002
Compliant with FCC 47 CFR Part 15, Class B
Compliant with RoHs.
0 to 70oC Operating: SPE-7100G / SPE-7101G /
SPE-7100-SG / SPE-7101-SG
The Copper SFP Transceiver provides standard serial
ID information compliant with SFP MSA, which can be
accessed with address of A0h via the 2-wire serial CMOS
EEPROM protocol. The physical IC can also be accessed
via 2-wire serial bus at address ACh. The address of the
PHY is 1010110x, where x is the R/W bit.
-40 to 85oC Operating: SPE-7100AG / SPE-7101AG /
SPE-7100A-SG / SPE-7101A-SG
APPLICATIONS
10/100/1000Mbps Ethernet over Category 5 Cable
Distributed multi-processing
High speed I/O for file server or high-end workstation
Switch/Router to Switch/Router Link
ORDER INFORMATION
P/No.
MAC Interfac
Speed
(Mb/s)
LOS
(Enable/Disable)
Distance
(m)
Package
Temp.
(oC)
RoHS
Compliant
SPE-7100G
SPE-7101G
SPE-7100-SG
SPE-7101-SG
SPE-7100AG
SPE-7101AG
SPE-7100A-SG
SPE-7101A-SG
Notes:
1.25Gbps SerDes
1.25Gbps SerDes
1000 only
1000 only
Enable
Disable
Enable
Disable
Enable
Disable
Enable
Disable
100
100
100
100
100
100
100
100
SFP
SFP
SFP
SFP
SFP
SFP
SFP
SFP
0 to 70
0 to 70
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
SGMII without clock 10 / 100 / 1000
SGMII without clock 10 / 100 / 1000
0 to 70
0 to 70
1.25Gbps SerDes
1.25Gbps SerDes
1000 only
1000 only
-40 to 85
-40 to 85
-40 to 85
-40 to 85
SGMII without clock 10 / 100 / 1000
SGMII without clock 10 / 100 / 1000
SPE-7100G, SPE-7101G, SPE-7100AG and SPE-7101AG 1000Mbps with a SERDES interface that does not support SGMII, these
modules will operate at 1000BASE-T only.
SPE-7100-SG, SPE-7101-SG, SPE-7100A-SG and SPE-7101A-SG 10/100/1000Mbps operation requires the host system to have an SGMII
interface without clocks and auto-negotiation advertise all capabilities 10/100/1000Mbps.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com
http: // www.optoway.com
2019/1/16 V1.0