5秒后页面跳转
SP5730 PDF预览

SP5730

更新时间: 2024-01-15 16:33:46
品牌 Logo 应用领域
MITEL /
页数 文件大小 规格书
14页 375K
描述
1.3GHz Low Phase Noise Frequency Synthesiser

SP5730 数据手册

 浏览型号SP5730的Datasheet PDF文件第2页浏览型号SP5730的Datasheet PDF文件第3页浏览型号SP5730的Datasheet PDF文件第4页浏览型号SP5730的Datasheet PDF文件第5页浏览型号SP5730的Datasheet PDF文件第6页浏览型号SP5730的Datasheet PDF文件第7页 
SP5730  
1.3GHz Low Phase Noise Frequency Synthesiser  
Preliminary Information  
DS4877  
issue 1.9  
July 1999  
Features  
Complete 1.3GHz single chip system for  
Digital Terrestrial Television applications  
Selectable reference division ratio, compatible  
with (DTT) requirements  
Optimised for low phase noise, with  
comparison frequencies up to 4MHz  
No RF prescaler  
Ordering Information  
SP5730A/KG/MP1S Sticks  
SP5730A/KG/MP1T Tape and Reel  
SP5730A/KG/QP1S Sticks  
SP5730A/KG/QP1T Tape amd Reel  
Selectable reference/comparison frequency  
output  
Four selectable I2C bus address  
I2C fast mode compliant and compatible with  
3.3 and 5V logic levels  
Description  
The SP5730 is a single chip frequency synthesiser  
designed for tuning systems up to 1.3GHz and is  
optimised for digital terrestrial applications.  
Four switching ports  
ESD protection, (Normal ESD Handling  
procedures should be observed)  
The RF preamplifier interfaces direct with the RF  
programmable divider, which is of MN+A construction  
so giving a step size equal to the loop comparison  
frequency and no prescaler phase noise degradation  
over the RF operating range.  
The comparison frequency is obtained either from an  
on-chip crystal controlled oscillator, or from an external  
source. The oscillator frequency, Fref, or phase  
comparator frequency, Fcomp, can be switched to the  
REF/COMP output providing a reference frequency for  
a second frequency synthesiser.  
Applications  
Digital Satellite ,Cable and Terrestrial tuning  
systems  
Communications systems  
The synthesiser is controlled via an I2C bus and is fast  
mode compliant. It can be hard wired to respond to one  
of four addresses to enable two or more synthesisers to  
be used on a common bus.  
The device contains four switching ports P0-P3.  

与SP5730相关器件

型号 品牌 获取价格 描述 数据表
SP5730A MITEL

获取价格

1.3GHz Low Phase Noise Frequency Synthesiser
SP5730A/KG/MP1S ZARLINK

获取价格

1.3 GHz Low Phase Noise Frequency Synthesiser
SP5730A/KG/MP1T ZARLINK

获取价格

1.3 GHz Low Phase Noise Frequency Synthesiser
SP5730A/KG/MP2S ZARLINK

获取价格

1.3 GHz Low Phase Noise Frequency Synthesiser
SP5730A/KG/MP2T ZARLINK

获取价格

1.3 GHz Low Phase Noise Frequency Synthesiser
SP5730A/KG/QP1S ZARLINK

获取价格

1.3 GHz Low Phase Noise Frequency Synthesiser
SP5730A/KG/QP1T ZARLINK

获取价格

1.3 GHz Low Phase Noise Frequency Synthesiser
SP5730A/KG/QP2S ZARLINK

获取价格

1.3 GHz Low Phase Noise Frequency Synthesiser
SP5730A/KG/QP2T ZARLINK

获取价格

1.3 GHz Low Phase Noise Frequency Synthesiser
SP5730KG MITEL

获取价格

1.3GHz Low Phase Noise Frequency Synthesiser