5秒后页面跳转
SP5730MP1S PDF预览

SP5730MP1S

更新时间: 2024-02-29 10:43:15
品牌 Logo 应用领域
MITEL /
页数 文件大小 规格书
14页 375K
描述
1.3GHz Low Phase Noise Frequency Synthesiser

SP5730MP1S 数据手册

 浏览型号SP5730MP1S的Datasheet PDF文件第2页浏览型号SP5730MP1S的Datasheet PDF文件第3页浏览型号SP5730MP1S的Datasheet PDF文件第4页浏览型号SP5730MP1S的Datasheet PDF文件第5页浏览型号SP5730MP1S的Datasheet PDF文件第6页浏览型号SP5730MP1S的Datasheet PDF文件第7页 
SP5730  
1.3GHz Low Phase Noise Frequency Synthesiser  
Preliminary Information  
DS4877  
issue 1.9  
July 1999  
Features  
Complete 1.3GHz single chip system for  
Digital Terrestrial Television applications  
Selectable reference division ratio, compatible  
with (DTT) requirements  
Optimised for low phase noise, with  
comparison frequencies up to 4MHz  
No RF prescaler  
Ordering Information  
SP5730A/KG/MP1S Sticks  
SP5730A/KG/MP1T Tape and Reel  
SP5730A/KG/QP1S Sticks  
SP5730A/KG/QP1T Tape amd Reel  
Selectable reference/comparison frequency  
output  
Four selectable I2C bus address  
I2C fast mode compliant and compatible with  
3.3 and 5V logic levels  
Description  
The SP5730 is a single chip frequency synthesiser  
designed for tuning systems up to 1.3GHz and is  
optimised for digital terrestrial applications.  
Four switching ports  
ESD protection, (Normal ESD Handling  
procedures should be observed)  
The RF preamplifier interfaces direct with the RF  
programmable divider, which is of MN+A construction  
so giving a step size equal to the loop comparison  
frequency and no prescaler phase noise degradation  
over the RF operating range.  
The comparison frequency is obtained either from an  
on-chip crystal controlled oscillator, or from an external  
source. The oscillator frequency, Fref, or phase  
comparator frequency, Fcomp, can be switched to the  
REF/COMP output providing a reference frequency for  
a second frequency synthesiser.  
Applications  
Digital Satellite ,Cable and Terrestrial tuning  
systems  
Communications systems  
The synthesiser is controlled via an I2C bus and is fast  
mode compliant. It can be hard wired to respond to one  
of four addresses to enable two or more synthesisers to  
be used on a common bus.  
The device contains four switching ports P0-P3.  

与SP5730MP1S相关器件

型号 品牌 获取价格 描述 数据表
SP5730MP1T MITEL

获取价格

1.3GHz Low Phase Noise Frequency Synthesiser
SP5730QP1S MITEL

获取价格

1.3GHz Low Phase Noise Frequency Synthesiser
SP5730QP1T MITEL

获取价格

1.3GHz Low Phase Noise Frequency Synthesiser
SP5742PFK1AKLQ5 NXP

获取价格

2 x e200Z4 cores in LS, 150 MHz, 1.5MB Flash, 192kB SRAM, LQFP 144, 1 x FlexRay, –4
SP5744BBK1AMMH2R NXP

获取价格

RISC Microcontroller
SP5745BBK1AMMH6R NXP

获取价格

RISC Microcontroller
SP5746CHK1AMMH6R NXP

获取价格

RISC Microcontroller
SP5748 MITEL

获取价格

2.4GHz Very Low Phase Noise PLL
SP5748/KG/MP1S ZARLINK

获取价格

PLL Frequency Synthesizer, BIPolar, PDSO14, 0.150 INCH, PLASTIC, MS-012-AB, SOIC-14
SP5748/KG/MP1S MICROSEMI

获取价格

PLL Frequency Synthesizer, BIPolar, PDSO14, MP-14