SN75196
MULTIPLE RS-232 DRIVERS AND RECEIVERS
SLLS188B – MAY 1995 – REVISED APRIL 1998
DW OR N PACKAGE
(TOP VIEW)
Single Chip With Easy Interface Between
UART and Serial-Port Connector of an
External Modem or Other Computer
Peripheral
1
2
3
4
5
6
7
8
9
10
20
19
18
17
16
15
14
13
12
11
V
V
DD
CC
1DA
2DA
3DA
1RY
2RY
4DA
3RY
5DA
GND
1DY
2DY
3DY
1RA
2RA
4DY
3RA
5DY
Five Drivers and Three Receivers Meet or
Exceed the Requirements of TIA/EIA-232-F
and ITU Recommendation V.28
Designed to Support Data Rates up to
120 kbit/s
ESD Protection Meets Or Exceeds 10 kV on
RS-232 Pins and 5 kV on All Other Pins
(Human-Body Model)
V
SS
Complement to the SN75185
Pin-to-Pin Replacement for the Goldstar
GD75323
Functional Replacement for the MC145405
description
The SN75196 combines five drivers and three receivers from the trade-standard SN75188 and SN75189
bipolar quadruple drivers and receivers, respectively. The flow-through design of the SN75196 decreases the
part count, reduces the board space required, and allows easy interconnection of the UART and serial-port
connector. The all-bipolar circuits and processing of the SN75196 provide a rugged, low-cost solution for this
function.
The SN75196 complies with the requirements of TIA/EIA-232-F and ITU (formerly CCITT) V.28 standards.
These standards are for data interchange between a host computer and peripheral at signal rates of up to
20 kbit/s. The switching speeds of the SN75196 are fast enough to support rates of up to 120 kbit/s with lower
capacitive loads (shorter cables). Interoperability at the higher signaling rates cannot be assured unless the
designer has design control of the cable and the interface circuits at both ends. For interoperability at signaling
rates of up to 120 kbit/s, use of TIA/EIA-423-B (ITU V.10) and TIA/EIA-422-B (ITU V.11) standards are
recommended.
The SN75196 is characterized for operation over a temperature range of 0°C to 70°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 1998, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265