Support &
Community
Product
Folder
Order
Now
Tools &
Software
Technical
Documents
SN74AXC2T245
SCES879 –MAY 2020
SN74AXC2T245 2-Bit Dual-Supply Bus Transceiver with Configurable Voltage Translation
and Tri-State Outputs
The SN74AXC2T245 device is designed for
asynchronous communication between data buses.
The device transmits data from the A bus to the B
bus or from the B bus to the A bus, depending on the
logic level of the direction-control inputs (DIRx). The
SN74AXC2T245 device is designed so the control pin
1 Features
1
•
Fully configurable dual-rail design allows each
port to operate with a power supply range from
0.65 V to 3.6 V
•
•
•
•
Operating temperature from –40°C to +125°C
DIR control input for each channel
(DIR) is referenced to VCCA
.
This device is fully specified for partial-power-down
applications using the Ioff current. The Ioff protection
circuitry ensures that no excessive current is drawn
from or to an input, output, or combined I/O that is
biased to a specific voltage while the device is
powered down.
Glitch-free power supply sequencing
Up to 380-Mbps support when translating from 1.8
V to 3.3 V
•
VCC isolation feature
–
If either VCC input is below 100 mV, all I/O
outputs are disabled and become high-
impedance
The VCC isolation feature ensures that if either VCCA
or VCCB is less than 100 mV, both I/O ports enter a
high-impedance state by disabling their outputs.
•
•
•
Ioff supports partial-power-down mode operation
Compatible with AVC-family level shifters
Glitch-free power supply sequencing allows either
supply rail to be powered on or off in any order while
providing robust power sequencing performance.
Latch-up performance exceeds 100 mA per JESD
78, class II
•
ESD protection exceeds JEDEC JS-001
Device Information(1)
–
–
8000-V Human-body model
PART NUMBER
PACKAGE BODY SIZE (NOM)
1000-V Charged-device model
SN74AXC2T245RSWR
UQFN (10) 1.80 mm x 1.40 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
2 Applications
•
•
•
•
•
•
Industrial
Functional Block Diagram
Personal Electronics
Wireless Infrastructure
Building Automation
Point of Sale
One of Two Transceivers
VCCA
VCCB
DIRx
OE
Enterprise and communications
3 Description
The SN74AXC2T245 is a two-bit noninverting bus
transceiver that uses two individually configurable
power-supply rails. The device is operational with
both VCCA and VCCB supplies as low as 0.65 V. The A
port is designed to track VCCA, which accepts any
supply voltage from 0.65 V to 3.6 V. The B port is
designed to track VCCB, which also accepts any
supply voltage from 0.65 V to 3.6 V. Additionally the
SN74AXC2T245 is compatible with a single-supply
system.
Bx
Ax
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.