SN74AXC2T45-Q1
SCES928A – APRIL 2021 – REVISED SEPTEMBER 2021
SN74AXC2T45-Q1 2-Bit Translating Transceiver with Configurable Level-Shifting
The SN74AXC2T45-Q1 device is designed for
asynchronous communication between data buses.
1 Features
•
•
AEC-Q100 automotive qualified
Fully configurable dual-rail design allows each port
to operate with a power supply range from 0.65 V
to 3.6 V
The device transmits data from the A bus to the B
bus or from the B bus to the A bus, depending on
the logic level of the direction-control input (DIR). The
SN74AXC2T45-Q1 device is designed so the control
•
•
•
Operating temperature from –40°C to +125°C
Glitch-free power supply sequencing
Up to 380 Mbps support when translating from 1.8
V to 3.3 V
pin (DIR) is referenced to VCCA.
This device is fully specified for partial-power-down
applications using the Ioff current. The Ioff protection
circuitry ensures that no excessive current is drawn
from or to an input, output, or combined I/O that
is biased to a specific voltage while the device is
powered down.
•
VCC isolation feature
– If either VCC input is below 100 mV, all
I/Os outputs are disabled and become high-
impedance
The VCC isolation feature ensures that if either VCCA
or VCCB is less than 100 mV, both I/O ports enter a
high-impedance state by disabling their outputs.
•
•
•
Ioff supports partial-power-down mode operation
Compatible with AVC family level shifters
Latch-up performance exceeds 100 mA per JESD
78, Class II
ESD protection exceeds JESD 22
– 8000-V human-body model
Glitch-free power supply sequencing allows either
supply rail to be powered on or off in any order while
providing robust power sequencing performance.
•
– 1000-V charged-device model
Device Information(1)
2 Applications
PART NUMBER
PACKAGE
BODY SIZE (NOM)
SN74AXC2T45DCU
VSSOP (8)
2.30 mm × 2.00 mm
•
•
•
•
•
•
Enterprise and communications
Industrial
Personal electronics
Wireless infrastructure
Building automation
Point-of-sale
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
VCCA
VCCB
DIR
A1
3 Description
The SN74AXC2T45-Q1 is a two-bit noninverting bus
transceiver that uses two individually configurable
power-supply rails. The device is operational with both
VCCA and VCCB supplies as low as 0.65 V. The A port
is designed to track VCCA, which accepts any supply
voltage from 0.65 V to 3.6 V. The B port is designed
to track VCCB, which also accepts any supply voltage
from 0.65 V to 3.6 V. Additionally the SN74AXC2T45-
Q1 is compatible with a single-supply system.
B1
B2
A2
Functional Block Diagram
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.