SN74ACT7814
64 × 18 STROBED FIRST-IN, FIRST-OUT MEMORY
SCAS209C – APRIL 1992 – REVISED APRIL 1998
DL PACKAGE
(TOP VIEW)
Member of the Texas Instruments
Widebus Family
Load Clock and Unload Clock Can Be
Asynchronous or Coincident
RESET
D17
D16
D15
D14
D13
D12
D11
OE
1
56
55
54
53
52
51
50
49
48
47
46
45
44
43
Q17
Q16
Q15
GND
Q14
2
64 Words by 18 Bits
3
Low-Power Advanced CMOS Technology
Full, Empty, and Half-Full Flags
4
5
6
Programmable Almost-Full/Almost-Empty
Flag
V
7
CC
Q13
Q12
Q11
Q10
Q9
8
Fast Access Times of 15 ns With a 50-pF
Load and All Data Outputs Switching
Simultaneously
D10
9
V
10
11
12
13
14
CC
D9
D8
GND
D7
Data Rates up to 50 MHz
3-State Outputs
GND
Q8
Pin-to-Pin Compatible With SN74ACT7804
and SN74ACT7806
D6 15
42 Q7
D5
D4
Q6
Q5
16
17
41
40
39
Packaged in Shrink Small-Outline 300-mil
Package Using 25-mil Center-to-Center
Spacing
D3 18
D2 19
V
CC
38 Q4
37 Q3
D1 20
description
36 Q2
D0 21
A FIFO memory is a storage device that allows
data to be written into and read from its array at
independent data rates. The SN74ACT7814 is a
64-word by 18-bit FIFO for high speed and fast
access times. It processes data at rates up to
50 MHz and access times of 15 ns in a bit-parallel
format.
35 GND
34 Q1
HF 22
PEN 23
AF/AE 24
LDCK 25
NC 26
33 Q0
32 UNCK
31 NC
NC 27
30 NC
FULL 28
29 EMPTY
Data is written into memory on a low-to-high
transition at the load clock (LDCK) input and is
read out on a low-to-high transition at the unload
clock (UNCK) input. The memory is full when the
number of words clocked in exceeds the number
of words clocked out by 64. When the memory is
full, LDCK signals have no effect on the data
residing in memory. When the memory is empty,
UNCK signals have no effect.
Status of the FIFO memory is monitored by the full (FULL), empty (EMPTY), half-full (HF), and
almost-full/almost-empty (AF/AE) flags. The FULL output is low when the memory is full and high when the
memory is not full. The EMPTY output is low when the memory is empty and high when it is not empty. The HF
output is high when the FIFO contains 32 or more words and is low when it contains 31 or fewer words. The
AF/AE status flag is a programmable flag. The first one or two low-to-high transitions of LDCK after reset are
used to program the almost-empty offset value (X) and the almost-full offset value (Y) if program enable (PEN)
is low. The AF/AE flag is high when the FIFO contains X or fewer words or (64 – Y) or more words. The AF/AE
flag is low when the FIFO contains between (X + 1) and (63 – Y) words.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Widebus is a trademark of Texas Instruments Incorporated.
Copyright 1998, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265