Datasheet > 存储 > FIFO> SN74ACT7808-30PM

SN74ACT7808-30PM

更新时间： 2024-11-16 05:17:59

品牌	Logo	应用领域
德州仪器 - TI		存储内存集成电路先进先出芯片时钟
页数	文件大小	规格书
18页	293K
描述
2048 】 9 STROBED FIRST-IN, FIRST-OUT MEMORY

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

SN74ACT7808-30PM 技术参数

是否无铅：	含铅	是否Rohs认证：	不符合
生命周期：	Obsolete	零件包装代码：	QFP
包装说明：	LFQFP, QFP64,.47SQ,20	针数：	64
Reach Compliance Code：	not_compliant	ECCN代码：	EAR99
HTS代码：	8542.32.00.71	风险等级：	5.91
Is Samacsys：	N	最长访问时间：	25 ns
最大时钟频率 (fCLK)：	33.3 MHz	周期时间：	30 ns
JESD-30 代码：	S-PQFP-G64	长度：	10 mm
内存密度：	18432 bit	内存集成电路类型：	OTHER FIFO
内存宽度：	9	功能数量：	1
端子数量：	64	字数：	2048 words
字数代码：	2000	工作模式：	SYNCHRONOUS
最高工作温度：	70 °C	最低工作温度：
组织：	2KX9	输出特性：	3-STATE
可输出：	YES	封装主体材料：	PLASTIC/EPOXY
封装代码：	LFQFP	封装等效代码：	QFP64,.47SQ,20
封装形状：	SQUARE	封装形式：	FLATPACK, LOW PROFILE, FINE PITCH
并行/串行：	PARALLEL	峰值回流温度（摄氏度）：	NOT SPECIFIED
电源：	5 V	认证状态：	Not Qualified
座面最大高度：	1.6 mm	子类别：	FIFOs
最大供电电压 (Vsup)：	5.5 V	最小供电电压 (Vsup)：	4.5 V
标称供电电压 (Vsup)：	5 V	表面贴装：	YES
技术：	CMOS	温度等级：	COMMERCIAL
端子形式：	GULL WING	端子节距：	0.5 mm
端子位置：	QUAD	处于峰值回流温度下的最长时间：	NOT SPECIFIED
宽度：	10 mm	Base Number Matches：	1

SN74ACT7808-30PM 数据手册

SN74ACT7808

2048 × 9 STROBED FIRST-IN, FIRST-OUT MEMORY

SCAS205E – FEBRUARY 1991 – REVISED NOVEMBER 2001

Load Clocks and Unload Clocks Can Be

Asynchronous or Coincident

Expansion Logic for Depth Cascading

Empty, Full, and Half-Full Flags

Fall-Through Time of 20 ns Typical

Data Rates up to 50 MHz

2048 Words by 9 Bits

Low-Power Advanced CMOS Technology

Fast Access Times of 15 ns With a 50-pF

Load

3-State Outputs

Package Options Include 44-Pin Plastic

Leaded Chip Carrier (FN), 64-Pin Thin Quad

Flat (PM), and Reduced-Height 64-Pin Quad

Flat (PAG) Packages

Programmable Almost-Full/Almost-Empty

Flag

description

A FIFO memory is a storage device that allows data to be written into and read from its array at independent

data rates. The SN74ACT7808 is a 2048-word by 9-bit FIFO designed for high speed and fast access times.

It processes data at rates up to 50 MHz and access times of 15 ns in a bit-parallel format.

Data is written into memory on a low-to-high transition at the load-clock (LDCK) input and is read out on a

low-to-high transition at the unload-clock (UNCK) input. The memory is full when the number of words clocked

in exceeds the number of words clocked out by 2048. When the memory is full, LDCK signals have no effect

on the data residing in memory. When the memory is empty, UNCK signals have no effect.

Status of the FIFO memory is monitored by the full (FULL), empty (EMPTY), half-full (HF), and

almost-full/almost-empty (AF/AE) flags. The FULL output is low when the memory is full and high when the

memory is not full. The EMPTY output is low when the memory is empty and high when it is not empty. The HF

output is high when the FIFO contains 1024 or more words and is low when it contains 1023 or fewer words.

The AF/AE status flag is a programmable flag. The first one or two low-to-high transitions of LDCK after reset

can be used to program the almost-empty offset value (X) and the almost-full offset value (Y) if program enable

(PEN) is low. The AF/AE flag is high when the FIFO contains X or fewer words or (2048 – Y) or more words.

The AF/AE flag is low when the FIFO contains between (X + 1) and (2047 – Y) words.

A low level on the reset (RESET) input resets the internal stack pointers and sets FULL high, AF/AE high, HF

low, and EMPTY low. The Q outputs are not reset to any specific logic level.

The first word loaded into empty memory causes EMPTY to go high and the data to appear on the Q outputs.

Itisimportanttonotethatthefirstworddoesnothavetobeunloaded. Dataoutputsarenoninvertingwithrespect

to the data inputs and are in the high-impedance state when the output-enable (OE) input is low. OE does not

affect the output flags.

Cascading is easily accomplished in the word-width and word-depth directions. When not using the FIFO in

depth expansion, cascade enable (CASEN) must be tied high.

The FIFO must be reset upon power up.

The SN74ACT7808 is characterized for operation from 0°C to 70°C.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

12 3 4 5 6 7...18

中文翻译

下载PDF

与SN74ACT7808-30PM相关器件

型号	品牌	获取价格	描述	数据表
SN74ACT7808-30PMR	TI	获取价格	暂无描述
SN74ACT7808-40FN	TI	获取价格	2048 】 9 STROBED FIRST-IN, FIRST-OUT MEMORY
SN74ACT7808-40PAG	TI	获取价格	2048 】 9 STROBED FIRST-IN, FIRST-OUT MEMORY
SN74ACT7808-40PAGR	TI	获取价格	2K X 9 OTHER FIFO, 28 ns, PQFP64, GREEN, PLASTIC, TQFP-64
SN74ACT7808-40PM	TI	获取价格	2048 】 9 STROBED FIRST-IN, FIRST-OUT MEMORY
SN74ACT7808-40PMR	TI	获取价格	2KX9 OTHER FIFO, 28ns, PQFP64, PLASTIC, LQFP-64
SN74ACT7808FN	TI	获取价格	2048 】 9 STROBED FIRST-IN, FIRST-OUT MEMORY
SN74ACT7808PAG	TI	获取价格	2048 】 9 STROBED FIRST-IN, FIRST-OUT MEMORY
SN74ACT7808PM	TI	获取价格	2048 】 9 STROBED FIRST-IN, FIRST-OUT MEMORY
SN74ACT7811	TI	获取价格	1024 】 18 CLOCKED FIRST-IN, FIRST-OUT MEMORY

与SN74ACT7808-30PM相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

13
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

7
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

35
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

31

产品中心

服务支持

精选活动

关于我们

帮助中心

SN74ACT7808-30PM

SN74ACT7808-30PM 技术参数

SN74ACT7808-30PM 数据手册

与SN74ACT7808-30PM相关器件

与SN74ACT7808-30PM相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

SN74ACT7808-30PM

SN74ACT7808-30PM 技术参数

SN74ACT7808-30PM 数据手册

与SN74ACT7808-30PM相关器件

与SN74ACT7808-30PM相关文章

您还可以找

您在本页遇到什么问题？