5秒后页面跳转
SN74ACT3631-20PCB PDF预览

SN74ACT3631-20PCB

更新时间: 2024-02-20 13:49:12
品牌 Logo 应用领域
德州仪器 - TI 存储
页数 文件大小 规格书
26页 379K
描述
512 】 36 CLOCKED FIRST-IN, FIRST-OUT MEMORY

SN74ACT3631-20PCB 技术参数

是否无铅: 含铅是否Rohs认证: 符合
生命周期:Obsolete零件包装代码:QFP
包装说明:BQFP, SPQFP132,1.1SQ针数:132
Reach Compliance Code:compliantECCN代码:EAR99
HTS代码:8542.39.00.01风险等级:5.77
Is Samacsys:N最长访问时间:13 ns
其他特性:MAILBOX最大时钟频率 (fCLK):50 MHz
周期时间:20 nsJESD-30 代码:S-PQFP-G132
JESD-609代码:e4长度:24.13 mm
内存密度:18432 bit内存集成电路类型:OTHER FIFO
内存宽度:36湿度敏感等级:4
功能数量:1端子数量:132
字数:512 words字数代码:512
工作模式:SYNCHRONOUS最高工作温度:70 °C
最低工作温度:组织:512X36
输出特性:3-STATE可输出:YES
封装主体材料:PLASTIC/EPOXY封装代码:BQFP
封装等效代码:SPQFP132,1.1SQ封装形状:SQUARE
封装形式:FLATPACK, BUMPER并行/串行:PARALLEL
峰值回流温度(摄氏度):260电源:5 V
认证状态:Not Qualified座面最大高度:4.57 mm
最大待机电流:0.0004 A子类别:FIFOs
最大供电电压 (Vsup):5.5 V最小供电电压 (Vsup):4.5 V
标称供电电压 (Vsup):5 V表面贴装:YES
技术:CMOS温度等级:COMMERCIAL
端子面层:Nickel/Palladium/Gold (Ni/Pd/Au)端子形式:GULL WING
端子节距:0.635 mm端子位置:QUAD
处于峰值回流温度下的最长时间:NOT SPECIFIED宽度:24.13 mm
Base Number Matches:1

SN74ACT3631-20PCB 数据手册

 浏览型号SN74ACT3631-20PCB的Datasheet PDF文件第2页浏览型号SN74ACT3631-20PCB的Datasheet PDF文件第3页浏览型号SN74ACT3631-20PCB的Datasheet PDF文件第4页浏览型号SN74ACT3631-20PCB的Datasheet PDF文件第5页浏览型号SN74ACT3631-20PCB的Datasheet PDF文件第6页浏览型号SN74ACT3631-20PCB的Datasheet PDF文件第7页 
SN74ACT3631  
512 × 36  
CLOCKED FIRST-IN, FIRST-OUT MEMORY  
SCAS246G – AUGUST 1993 – REVISED APRIL 1998  
Free-Running CLKA and CLKB Can Be  
Asynchronous or Coincident  
Output-Ready and Almost-Empty Flags  
Synchronized by CLKB  
Clocked FIFO Buffering Data From Port A  
to Port B  
Low-Power 0.8-µm Advanced CMOS  
Technology  
Synchronous Read-Retransmit Capability  
Mailbox Register in Each Direction  
Supports Clock Frequencies up to 67 MHz  
Fast Access Times of 11 ns  
Programmable Almost-Full and  
Almost-Empty Flags  
Pin-to-Pin Compatible With the  
SN74ACT3641 and SN74ACT3651  
Microprocessor Interface Control Logic  
Package Options Include 120-Pin Thin  
Quad Flat (PCB) and 132-Pin Plastic Quad  
Flat (PQ) Packages  
Input-Ready and Almost-Full Flags  
Synchronized by CLKA  
description  
The SN74ACT3631 is a high-speed, low-power, CMOS clocked FIFO memory. It supports clock frequencies  
up to 67 MHz and has read access times as fast as 11 ns. The 512 × 36 dual-port SRAM FIFO buffers data from  
port A to port B. The FIFO memory has retransmit capability, which allows previously read data to be accessed  
again. The FIFO has flags to indicate empty and full conditions and two programmable flags (almost full and  
almost empty) to indicate when a selected number of words is stored in memory. Communication between each  
port can take place with two 36-bit mailbox registers. Each mailbox register has a flag to signal when new mail  
has been stored. Two or more devices can be used in parallel to create wider datapaths. Expansion also is  
possible in word depth.  
The SN74ACT3631 is a clocked FIFO, which means each port employs a synchronous interface. All data  
transfersthroughaportaregatedtothelow-to-hightransitionofacontinuous(free-running)portclockbyenable  
signals. The continuous clocks for each port are independent of one another and can be asynchronous or  
coincident. The enables for each port are arranged to provide a simple interface between microprocessors  
and/or buses with synchronous control.  
The input-ready (IR) flag and almost-full (AF) flag of the FIFO are two-stage synchronized to CLKA. The  
output-ready (OR) flag and almost-empty (AE) flag of the FIFO are two-stage synchronized to CLKB. Offset  
values for the AF and AE flags of the FIFO can be programmed from port A or through a serial input.  
The SN74ACT3631 is characterized for operation from 0°C to 70°C.  
For more information on this device family, see the following application reports:  
FIFO Patented Synchronous Retransmit: Programmable DSP-Interface Application for FIR Filtering  
(literature number SCAA007)  
FIFO Mailbox-Bypass Registers: Using Bypass Registers to Initialize DMA Control (literature number  
SCAA007)  
Metastability Performance of Clocked FIFOs (literature number SCZA004).  
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of  
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
Copyright 1998, Texas Instruments Incorporated  
PRODUCTION DATA information is current as of publication date.  
Products conform to specifications per the terms of Texas Instruments  
standard warranty. Production processing does not necessarily include  
testing of all parameters.  
1
POST OFFICE BOX 655303 DALLAS, TEXAS 75265  

SN74ACT3631-20PCB 替代型号

型号 品牌 替代类型 描述 数据表
72V3612L12PFG IDT

功能相似

3.3 VOLT CMOS SyncBiFIFO
723642L15PFG IDT

功能相似

CMOS SyncBiFIFO
723651L15PFG IDT

功能相似

CMOS SyncFIFO

与SN74ACT3631-20PCB相关器件

型号 品牌 获取价格 描述 数据表
SN74ACT3631-20PCBR TI

获取价格

512X36 OTHER FIFO, 13ns, PQFP120, GREEN, PLASTIC, HLQFP-120
SN74ACT3631-20PQ TI

获取价格

512 】 36 CLOCKED FIRST-IN, FIRST-OUT MEMORY
SN74ACT3631-30PCB TI

获取价格

512 】 36 CLOCKED FIRST-IN, FIRST-OUT MEMORY
SN74ACT3631-30PCBR TI

获取价格

暂无描述
SN74ACT3631-30PQ TI

获取价格

512 】 36 CLOCKED FIRST-IN, FIRST-OUT MEMORY
SN74ACT3631PCB TI

获取价格

512 】 36 CLOCKED FIRST-IN, FIRST-OUT MEMORY
SN74ACT3631PQ TI

获取价格

512 】 36 CLOCKED FIRST-IN, FIRST-OUT MEMORY
SN74ACT3632 TI

获取价格

512 】 36 】 2 CLOCKED BIDIRECTIONAL FIRST-IN,
SN74ACT3632-15PCBR TI

获取价格

512X36 BI-DIRECTIONAL FIFO, 11ns, PQFP120, TQFP-120
SN74ACT3632-20PCB TI

获取价格

512 x 36 x 2 bidirectional synchronous FIFO memory 120-HLQFP 0 to 70