SN65LVPE502
www.ti.com
SLLSE29 A –APRIL 2010–REVISED FEBRUARY 2012
Dual Channel USB3.0 Redriver/Equalizer
Check for Samples: SN65LVPE502
1
FEATURES
•
Excellent Jitter and Loss Compensation
Capability: to 24"
•
•
Single Lane USB 3.0 Equalizer/Redriver
–
–
24" of 6 mil Stripline on FR4
Selectable Equalization, De-emphasis and
Output Swing Control
12" on Input and 4m, 26AWG USB 3.0 Cable
on Output
•
•
•
•
Integrated Termination
Hot-Plug Capable
Receiver Detect
Low Power:
•
•
Small foot print – 24 Pin (4mm × 4mm) QFN
Package
High Protection Against ESD Transient
–
–
–
HBM: 5,000 V
CDM: 1,500 V
MM: 200 V
–
315mW(TYP), VCC = 3.3V
•
Auto Low Power Modes:
–
–
5mW (TYP) When no Connection Detected
70mW (TYP) When in U2/U3 Mode
APPLICATIONS
•
Notebooks, Desktops, Docking Stations,
Backplane and Cabled Application
DESCRIPTION
The SN65LVPE502 is a dual channel, single lane USB 3.0 redriver and signal conditioner supporting data rates
of 5.0Gbps. The device complies with USB 3.0 spec revision 1.0, supporting electrical idle condition and low
frequency periodic signals (LFPS) for USB 3.0 power management modes.
Programmable EQ, De-Emphasis and Amplitude Swing
The SN65LVPE502 is designed to minimize signal degradation effects such as crosstalk and inter-symbol
interference (ISI) that limits the interconnect distance between two devices. The input stage of each channel
offers selectable equalization settings that can be programmed to match loss in the channel. The differential
outputs provide selectable de-emphasis to compensate for the anticipated distortion USB 3.0 signal will
experience. Level of de-emphasis will depend on the length of interconnect and its characteristics. The
SN65LVPE502 provides a unique way to tailor output de-emphasis on a per channel basis with use of DE and
OS pins. All Rx and Tx equalization settings supported by the device are programmed by six 3-state pins as
shown in Table 2.
Low Power Modes
The device supports three low power modes as described below.
1. Sleep Mode
Initiated anytime EN_RXD undergoes a high to low transition or when device powers up with EN_RXD set
low. In sleep mode both input and output terminations are held at HiZ and device ceases operation to
conserve power. Sleep mode max power consumption is 1mW, entry time is 2µs, device exits sleep mode to
Rx.Detect mode after EN_RXD is driven to VCC, exit time is 100µs max.
2. RX Detect Mode – When no remote device is connected
Anytime SN65LVPE502 detects a break in link (i.e., when upstream device is disconnected) or after powerup
fails to find a remote device, SN65LVPE502 goes to Rx Detect mode and conserves power by shutting down
majority of the internal circuitry. In this mode, input termination for both channels are driven to Hi-Z. In Rx
Detect mode device power is <10mW(TYP) or less than 5% of its normal operating power This feature is
useful in saving system power in mobile applications like notebook PC where battery life is critical.
Anytime an upstream device gets reconnected the redriver automatically senses the connection and goes to
normal operating mode. This operation requires no setting to the device.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2010–2012, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
5秒后页面跳转
解析光耦仿真器：升级光耦合器技术的必要性
英伟达新一代Blackwell GPU过热问题致交付延迟
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
