SN65HVD10, SN65HVD10Q, SN75HVD10
SN65HVD11, SN65HVD11Q, SN75HVD11
SN65HVD12, SN75HVD12
www.ti.com
SLLS505I–FEBRUARY 2002–REVISED JULY 2006
3.3-V RS-485 TRANSCEIVERS
FEATURES
DESCRIPTION
•
•
•
Operates With a 3.3-V Supply
The SN65HVD10, SN75HVD10, SN65HVD11,
SN75HVD11, SN65HVD12, and SN75HVD12
Bus-Pin ESD Protection Exceeds 16 kV HBM
combine
a 3-state differential line driver and
1/8 Unit-Load Option Available (Up to 256
Nodes on the Bus)
differential input line receiver that operate with a
single 3.3-V power supply. They are designed for
balanced transmission lines and meet or exceed
ANSI standard TIA/EIA-485-A and ISO 8482:1993.
These differential bus transceivers are monolithic
integrated circuits designed for bidirectional data
communication on multipoint bus-transmission lines.
The drivers and receivers have active-high and
active-low enables respectively, that can be
externally connected together to function as direction
control. Very low device standby supply current can
be achieved by disabling the driver and the receiver.
•
Optional Driver Output Transition Times for
Signaling Rates (1) of 1 Mbps, 10 Mbps, and
32 Mbps
•
•
Meets or Exceeds the Requirements of ANSI
TIA/EIA-485-A
Bus-Pin Short Circuit Protection From -7 V to
12 V
•
•
Low-Current Standby Mode . . . 1 µA Typical
Open-Circuit, Idle-Bus, and Shorted-Bus
Failsafe Receiver
The driver differential outputs and receiver
differential inputs connect internally to form
a
•
•
Thermal Shutdown Protection
differential input/ output (I/O) bus port that is
designed to offer minimum loading to the bus
whenever the driver is disabled or VCC = 0. These
Glitch-Free Power-Up and Power-Down
Protection for Hot-Plugging Applications
•
SN75176 Footprint
parts feature wide positive and
negative
common-mode voltage ranges, making them suitable
for party-line applications.
APPLICATIONS
•
•
•
•
•
•
•
Digital Motor Control
Utility Meters
Chassis-to-Chassis Interconnects
Electronic Security Stations
Industrial Process Control
Building Automation
D OR P PACKAGE
(TOP VIEW)
R
RE
DE
D
V
B
A
1
2
3
4
8
7
6
5
CC
GND
Point-of-Sale (POS) Terminals and Networks
1
2
R
RE
3
4
DE
D
6
A
(1) The signaling rate of a line is the number of voltage
transitions that are made per second expressed in the units
bps (bits per second).
7
B
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2002–2006, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.