SMPC5.0A thru SMPC36A, SMPC22AN thru SMPC85AN
www.vishay.com
Vishay General Semiconductor
®
Surface Mount TRANSZORB
Transient Voltage Suppressors
FEATURES
eSMP® Series
• Very low profile - typical height of 1.1 mm
• Ideal for automated placement
• Unidirection
• Excellent clamping capability
• Low incremental surge resistance
1
• Very fast response time
• Meets MSL level 1, per J-STD-020, LF maximum peak
of 260 °C
2
SMPC (TO-277A)
• AEC-Q101 qualified available
- Automotive ordering code: base P/NHM3
Cathode 1
Cathode 2
A
SMPCxxA
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Anode
Anode 1
Anode 2
K
SMPCxxAN
Cathode
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial and telecommunication. Sensitive
equipment against transient overvoltages.
LINKS TO ADDITIONAL RESOURCES
3
D
3D Models
PRIMARY CHARACTERISTICS
MECHANICAL DATA
VBR unidirectional
6.40 V to 104 V
Case: SMPC (TO-277A)
Molding compound meets UL 94 V-0 flammability rating
VWM
5.0 V to 85 V
1500 W
Base P/N-M3
industrial grade
Base P/NHM3
-
halogen-free, RoHS-compliant, and
halogen-free, RoHS-compliant, and
PPPM
PD at TA = 25 °C
1.25 W
-
TJ max.
150 °C
AEC-Q101 qualified
Polarity
Unidirectional
SMPC (TO-277A)
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
Package
Note
M3 and HM3 suffix meet JESD 201 class 2 whisker test
•
All electrical characteristics are only applicable when two
identical polarity terminals are connected
Polarity: the band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VALUE
1500
UNIT
W
(1)
Peak power dissipation with a 10/1000 μs waveform (fig. 3)
PPPM
(1)
Peak pulse current with a 10/1000 μs waveform (fig. 1)
Power dissipation, TA = 25 °C
IPPM
See next table
1.25
A
(2)
PD
W
Operating junction and storage temperature range
TJ, TSTG
-55 to +150
°C
Note
(1)
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
Power dissipation mounted on FR4 PCB, 2 oz. standard footprint
(2)
Revision: 17-Sep-2021
Document Number: 89116
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000