New Product
SMPC5.0A thru SMPC36A
Vishay General Semiconductor
®
Surface Mount TRANSZORB Transient Voltage Suppressors
FEATURES
eSMP® Series
• Very low profile - typical height of 1.1 mm
• Ideal for automated placement
A
• Uni-direction only
• Excellent clamping capability
1
• Low incremental surge resistance
• Very fast response time
2
• Meets MSL level 1, per J-STD-020
TO-277A (SMPC)
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
Cathode 1
Cathode 2
A
• Halogen-free according to IEC 61249-2-21 definition
Anode
MECHANICAL DATA
Case: TO-277A (SMPC)
PRIMARY CHARACTERISTICS
VWM
PPPM
PD
5.0 V to 36 V
1500 W
6.5 W
Molding compound meets UL 94 V-0 flammability rating
Base P/N-M3
- halogen-free, RoHS compliant, and
commercial grade
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
IFSM
200 A
M3 suffix meets JESD 201 class 1A whisker test
TJ max.
150 °C
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial and telecommunication. Sensitive
equipment against transient overvoltages.
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VALUE
1500
UNIT
W
(1)(2)
Peak power dissipation with a 10/1000 μs waveform (fig. 3)
Peak pulse current with a 10/1000 μs waveform (fig. 1)
Peak forward surge current 8.3 ms single half sine-wave
Power dissipation on infinite heatsink, TA = 50 °C
Maximum instandaneous forward voltage at 100 A
Operating junction and storage temperature range
PPPM
(1)
IPPM
See next table
200
A
(2)
IFSM
A
PD
6.5
W
(3)
VF
3.5
V
TJ, TSTG
- 55 to + 150
°C
Notes
(1)
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
Measured on 8.3 ms single half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minute maximum
Pulse test: 300 µs pulse width, 1 % duty cyclet
(2)
(3)
Document Number: 89116
Revision: 19-Apr-11
For technical questions within your region, please contact one of the following:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
www.vishay.com
19
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000