SMBG AND SMBJ5.0 THRU 170CA
SURFACE MOUNT TRANSZORB™ TRANSIENT VOLTAGE SUPPRESSOR
Stand-off Voltage - 5.0 to170 Volts
Peak Pulse Power - 600 Watts
DO-214AA
MODIFIED J-BEND
FEATURES
♦ Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
♦ For surface mounted applications in order to optimize
board space
0.086 (2.20)
0.077 (1.95)
0.155 (3.94)
0.130 (3.30)
0.180 (4.57)
0.160 (4.06)
♦ Low profile package
♦ Built-in strain relief
♦ Glass passivated junction
0.012 (0.305)
0.006 (0.152)
♦ Low incremental surge resistance
♦ 600W peak pulse power capability with a 10/1000µs
waveform, repetition rate (duty cycle): 0.01%
♦ Excellent clamping capability
0.096 (2.44)
0.084 (2.13)
0.008 (0.203)
MAX.
0.060 (1.52)
0.030 (0.76)
0.220 (5.59)
0.205 (5.21)
♦ Fast response time: typically less than 1.0ps from 0 volts
to V
for unidirectional and 5.0ns for bidirectional types
(BR)
♦ For devices with V ≥10V, I are typically less
(BR) D
than 1.0µA
DO-215AA
GULL WING
♦ High temperature soldering guaranteed:
250°C/10 seconds at terminals
0.245 (6.22)
0.130 (5.72)
0.125 (3.17)
0.115 (2.92)
MECHANICAL DATA
Case: JEDEC DO214AA / DO215AA molded plastic body
over passivated junction
0.280 (7.11)
0.260 (6.60)
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: For unidirectional types the color band denotes the
cathode, which is postitive with respect to the anode under
normal TVS operation
0.008 (0.20)
0.004 (0.10)
0.095 (2.41)
0.075 (1.90)
0.016 (0.41)
0.006 (0.15)
0.058 (1.47)
0.038 (0.97)
0.032 (8.10)
0.024 (6.10)
0.020
(0.51)
MAX.
SEATING
PLANE
0.400 (10.16)
0.380 (9.64)
Mounting Position: Any
Dimensions in inches and (millimeters)
Weight: 0.003 ounces, 0.093 gram
DEVICES FOR BIDIRECTIONAL APPLICATIONS
For bidirectional use suffix C or CA for types SMB-5.0 thru SMB-170 (eg. SMBG5.0C, SMBJ170CA).
Electrical characteristics apply in both directions
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS
PPPM
VALUE
UNITS
Watts
Amps
Peak pulse power dissipation with a 10/1000µs waveform (NOTES 1, 2, FIG. 1)
Peak pulse current with a 10/1000µs waveform (NOTE 1)
Minimum 600
SEE TABLE 1
IPPM
Peak forward surge current 8.3ms single half sine-wave superimposed
on rated load (JEDEC Method) (NOTES 2, 3) - unidirectional only
IFSM
100.0
Amps
Maximum instantaneous forward voltage at 50A (NOTE 3) unidirectional only
Operating junction and storage temperature range
VF
3.5
Volts
°C
TJ, TSTG
-55 to +150
NOTES:
(1) Non-repetitive current pulse, per Fig.3 and derated above TA=25°C per Fig. 2
(2) Mounted on 0.2 x 0.2” (5.0 x 5.0mm) copper pads to each terminal
(3) Measured on 8.3ms single half sine-wave. For uni-directional devices only.
2/1/99