REVISION Y
SIB-1XX-XX-XX-S-XX-XX
C
+.0043
- .0017
+0.109
0.076
- 0.043
.0030
No OF POSITIONS
THREADED INSERT OPTION
-02 THRU -30
(PER ROW)
[NOT AVAILABLE ON 30 POS]
-E: TI-2-56-115 (ENGLISH)
-M: TI-M2-4-115-N (METRIC)
(SEE FIG. 2, SHEET 2)
-TI: NO INSERTS PLACED IN BODY
(SEE TABLE 1 ON SHEET 2 FOR
-TI POSITIONAL OFFERINGS)
(SEE NOTES 9 & 10)
DO NOT
SCALE FROM
THIS PRINT
*
*
*
DETAIL 'A'
SCALE 10 : 1
LEAD STYLE
-02: SURFACE MOUNT
(USE C-228-X)
OPTION
.015[.38]
.005[.13]
No OF POSITIONS x .100[2.54]
-LC: LOCKING CLIPS
(USE LC-09-TM)(SEE NOTE 13)
[N/A WITH THREADED INSERT OPTION
-E, -M OR -TI]
PLATING SPECIFICATION
-F: FLASH SELECTIVE
(USE C-228-F)
C
.050 1.27
REF
((No OF POSITIONS -1) x .100[2.54]) .005[.13]
-FM: FLASH SELECTIVE, PURE TIN,
MATTE FINISH
ROW SPECIFICATION
(USE C-228-F)
-S: SINGLE (USE SIBC-XX-02-S)
AVAILABLE TO EXISTING CUSTOMERS ONLY
*
.264 6.706 REF
.335 8.509
REF
01
.015 0.38 REF
SIBC-XX-02-S
.0287 0.729 MIN END
WALL ON CUT PART
FIG 1
SIB-120-02-X-S-LC SHOWN
C-228-X
"A"
.172 4.38 REF
C
'A'
.207±.005 5.268±0.127
.150 3.810 REF
.0560 1.422 REF
.203 5.16
"A"
LC-09-TM
.045 1.143
C
(No OF POSITIONS -2) x .100[2.54] REF
(No OF POSITIONS -1) x .100(2.54) REF
.071±.003 1.803±0.08
.044 1.13 REF
NOTES:
SECTION "A"-"A"
C
1.
REPRESENTS A CRITICAL DIMENSION.
C
2. COPLANARITY: SEE TABLE 2.
3. BURR ALLOWANCE: .0015[.038] MAX.
4. MAXIMUM CUT FLASH: .010[.3], CAN NOT EXTEND PAST TAIL.
5. MINIMUM PUSHOUT FORCE: 1 LB.
6. MAXIMUM ALLOWABLE BOW: .004[.10] INCH/INCH AFTER ASSEMBLY.
7. THREADED INSERT MUST HANDLE 25 IN-OZ OF TORQUE WITHOUT
ROTATING OR LOOSENING.
8. THREADED INSERT RETENTION: 10 LBS. MINIMUM.
9. MAX VARATION FROM PIN TO PIN TO BE .002.
10. MEASURED ON UNCUT PARTS.
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
2
.XX: .01 [.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
.XXX: .005 [.13]
PHONE: 812-944-6733
e-Mail info@SAMTEC.com
FAX: 812-948-5047
code 55322
.XXXX: .0020 [.051]
11. NOTE DELETED.
12. NOTE DELETED.
SHEET SCALE: 2:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
.100 SINGLE INTERFACE BEAM ASSEMBLY
DWG. NO.
INSULATOR: LCP, COLOR: BLACK
CONTACT: PHOSPHOR BRONZE
13. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -LC OPTION
IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS
MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION.
SIB-1XX-XX-XX-S-XX-XX
SHEET 1 OF
2
BY: DEAN P
9/20/2000
F:\DWG\MISC\MKTG\SIB-1XX-XX-XX-S-XX-XX-MKT.SLDDRW