5A, 12V Electronic Fuse (eFuse)
with Thermal Shutdown
SGM2528
PACKAGE/ORDERING INFORMATION
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
MODEL
SGM
2528AD
XXXXX
SGM
2528BD
XXXXX
SGM
SGM2528A
SGM2528B
SGM2528C
TDFN-3×3-10L
TDFN-3×3-10L
TDFN-3×3-10L
SGM2528AXTD10G/TR
Tape and Reel, 4000
Tape and Reel, 4000
Tape and Reel, 4000
-40℃ to +125℃
-40℃ to +125℃
-40℃ to +125℃
SGM2528BXTD10G/TR
SGM2528CXTD10G/TR
2528CD
XXXXX
MARKING INFORMATION
NOTE: XXXXX = Date Code, Trace Code and Vendor Code.
X X X X X
Vendor Code
Trace Code
Date Code - Year
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.
OVERSTRESS CAUTION
ABSOLUTE MAXIMUM RATINGS
Operating Input Voltage Range (VCC to GND) (1)
Stresses beyond those listed in Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to
absolute maximum rating conditions for extended periods
may affect reliability. Functional operation of the device at any
conditions beyond those indicated in the Recommended
Operating Conditions section is not implied.
Steady-State .................................................. -0.3V to 18V
Transient (100ms).......................................... -0.6V to 25V
V
CC, SOURCE, ILIMIT to GND.............................. -0.3V to 25V
dV/dt, ENABLE/FAULT to GND........................ -0.3V to 5.5V
Package Thermal Resistance
TDFN-3×3-10L, θJA .................................................. 90℃/W
TDFN-3×3-10L, θJB .................................................. 54℃/W
TDFN-3×3-10L, θJC .................................................. 52℃/W
Junction Temperature.................................................+150℃
Storage Temperature Range.......................-65℃ to +150℃
Lead Temperature (Soldering, 10s)............................+260℃
ESD Susceptibility
ESD SENSITIVITY CAUTION
This integrated circuit can be damaged if ESD protections are
not considered carefully. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failureto observe proper handlingand installation procedures
can cause damage. ESD damage can range from subtle
performance degradation tocomplete device failure. Precision
integrated circuits may be more susceptible to damage
because even small parametric changes could cause the
device not to meet the published specifications.
HBM.............................................................................2000V
CDM ............................................................................1000V
NOTE: 1. Negative voltages can be withstood by the device
without damage as long as the power dissipation is limited to
the power rating allowed by the package.
DISCLAIMER
SG Micro Corp reserves the right to make any change in
RECOMMENDED OPERATING CONDITIONS
circuit design, or specifications without prior notice.
Operating Junction Temperature Range......-40℃ to +125℃
SG Micro Corp
www.sg-micro.com
OCTOBER 2022
2