SGM25711B
2.5V to 18V High-Efficiency
Hot Swap Controller with Power-Limiting
GENERAL DESCRIPTION
FEATURES
The SGM25711B is a hot swap controller that allows a
board to be safely inserted or removed from a live
backplane. An internal circuit drives an external
N-MOSFET switch to control supply voltage from 2.5V
to 18V.
● Input Voltage Range from 2.5V to 18V
● Programmable MOSFET SOA Protection
● Accurate Current Limit at All Times
● Accurate 25mV Current Sense Threshold
● Power Good Output
● Fast Circuit-Breaker for Short-Circuit Protection
● Programmable Fault Timer
● Programmable Under-Voltage Threshold
● Active-Low for nPG and nFLT Pins
● Available in a Green MSOP-10 Package
The SGM25711B offers programmable current limit,
power-limiting and fault time to ensure that the external
MOSFET is always working within its safe operating
area. If the load current is higher than the set current for
more than the programmed time, the external MOSFET
will be shutdown. The SGM25711B restarts automatically
after a fault timeout delay. The low current sense
threshold of 25mV is very accurate, which allows the
use of smaller detection resistors resulting in lower
power losses and smaller size.
APPLICATIONS
Medical Systems
Storage Area Networks (SAN)
Plug-In Modules
This feature allows the user to easily design a high
reliability system. The device has power and fault
output functions to provide condition monitoring and
load protection.
Base Stations
SGM25711B is available in a Green MSOP-10 package.
TYPICAL APPLICATION
RSENSE
2mΩ
M1
VIN
CSD16403Q5
VOUT
COUT
C1
0.1μF
470μF
RGATE
10Ω
3V
SENSE
GATE
OUT
nPG
R4
3.01kΩ
VCC
R5
3.01kΩ
R1
130kΩ
SGM25711B
nFLT
EN
R2
18.7kΩ
TIMER
GND
PROG
CTIMER
56nF
RPROG
44.2kΩ
VUVLO = 10.8V
ILIM = 12A
tnFLT = 7.56ms
Figure 1. Typical Application Circuit (12V/10A)
SG Micro Corp
OCTOBER 2022 – REV. A. 1
www.sg-micro.com