Accessories
Relay Testers
SE-400 SERIES
Ground-Fault-Relay Test Unit
Description
The SE-400 is a ground-fault-relay test unit designed to test
current pickup level, time delay and coordination of ground-
fault protection.
The tester injects current through the window of installed
ground-fault current transformers to verify the operation of
ground-fault monitors and relays.
It is used on substations, motor control centers (MCCs),
central distribution panels, switchboards, and test benches to
verify relay operation.
The SE-400 tests the entire ground-fault circuit including
current transformers, wiring, ground-fault relay and the
operation of the interrupting device. It is recommended to
test every relay and its current interrupting device annually.
Features & Benefits
FEꢁTURES
BENEFITS
Adjustable Current
Setpoint
Current range is 0.5 to 9.9 A
Adjustable Time
Duration Setpoint
Duration range is 0.1 to 9.9 s, or continuous
output
Simplified Circuit Diagram
Small Form Factor
Lightweight and compact for portability
CT
Allows test to be initiated from another
location
Remote Test Input
Ordering Information
ORDERING NUMBER
CONTROꢀ pOwER
SE-400
120 Vac
CT
NGR
NGR
GROUND-FAULT
MONITOR
SENSING
MONITOR
RESISTOR
Specifications
Input Voltage
Dimensions
84-134 Vac, 50/60 Hz, 80 VA
H 219 mm (8.6”);
W 99 mm (3.9”);
D 143 mm (5.6”)
0.5-9.9 A
0.1-9.9 s or continuous
5.0 Vac maximum
Standard feature
5 Year
L1
L2
L1
L2
Output Current Settings
Output Duration Settings
Output Voltage
Conformally Coated
Warranty
SE-400 SERIES
(Ground-Fault
Relay Test Unit)
L1
L2
Mounting
Surface, Panel
© 2015 Littelfuse Protection Relays & Controls
Rev: 4-A-081515
Based on Manual Rev: 1-A-072115