SC18IS602B

更新时间： 2024-11-05 06:10:15

阅读下载

中文翻译

获取价格

如果您发现信息不准确，欢迎纠错

SC18IS602B 数据手册

SC18IS602B

I²C-bus to SPI bridge

Rev. 5 — 3 August 2010

Product data sheet

1. General description

The SC18IS602B is designed to serve as an interface between a standard I²C-bus of a

microcontroller and an SPI bus. This allows the microcontroller to communicate directly

with SPI devices through its I²C-bus. The SC18IS602B operates as an I²C-bus

slave-transmitter or slave-receiver and an SPI master. The SC18IS602B controls all the

SPI bus-specific sequences, protocol, and timing. The SC18IS602B has its own internal

oscillator, and it supports four SPI chip select outputs that may be configured as GPIO

when not used.

2. Features and benefits

I²C-bus slave interface operating up to 400 kHz

SPI master operating up to 1.8 Mbit/s

200-byte data buffer

Up to four slave select outputs

Up to four programmable I/O pins

Operating supply voltage: 2.4 V to 3.6 V

Low power mode

Internal oscillator option

Active LOW interrupt output

ESD protection exceeds 2000 V HBM per JESD22-A114, 200 V MM per

JESD22-A115, and 1000 V CDM per JESD22-C101

Latch-up testing is done to JEDEC Standard JESD78 that exceeds 100 mA

Very small 16-pin TSSOP

3. Applications

Converting I²C-bus to SPI

Adding additional SPI bus controllers to an existing system

12 3 4 5 6 7...25

中文翻译

下载PDF

型号	品牌	获取价格	描述	数据表
SC18IS602B_1008	NXP	获取价格	I2C-bus to SPI bridge
SC18IS602BIPW	NXP	获取价格	I2C-bus to SPI bridge
SC18IS602BIPW,112	NXP	获取价格	SC18IS602B - I2C-bus to SPI bridge TSSOP 16-Pin
SC18IS602IPW	NXP	获取价格	I2C-bus to SPI bridge
SC18IS602IPW,112	NXP	获取价格	SC18IS602IPW
SC18IS602IPW,128	NXP	获取价格	SC18IS602IPW
SC18IS602IPW-F	NXP	获取价格	IC,BUS CONTROLLER,TSSOP,16PIN
SC18IS603	NXP	获取价格	I2C-bus to SPI bridge
SC18IS603IPW	NXP	获取价格	I2C-bus to SPI bridge
SC18IS603IPW,112	NXP	获取价格	SC18IS602_602B_603 - I2C-bus to SPI bridge TSSOP 16-Pin