5秒后页面跳转
SC16C750BIBS,128 PDF预览

SC16C750BIBS,128

更新时间: 2023-03-15 00:00:00
品牌 Logo 应用领域
恩智浦 - NXP 先进先出芯片
页数 文件大小 规格书
44页 212K
描述
SC16C750B - 5 V, 3.3 V and 2.5 V UART with 64-byte FIFOs QFN 32-Pin

SC16C750BIBS,128 数据手册

 浏览型号SC16C750BIBS,128的Datasheet PDF文件第2页浏览型号SC16C750BIBS,128的Datasheet PDF文件第3页浏览型号SC16C750BIBS,128的Datasheet PDF文件第4页浏览型号SC16C750BIBS,128的Datasheet PDF文件第5页浏览型号SC16C750BIBS,128的Datasheet PDF文件第6页浏览型号SC16C750BIBS,128的Datasheet PDF文件第7页 
SC16C750B  
5 V, 3.3 V and 2.5 V UART with 64-byte FIFOs  
Rev. 05 — 17 October 2008  
Product data sheet  
1. General description  
The SC16C750B is a Universal Asynchronous Receiver and Transmitter (UART) used for  
serial data communications. Its principal function is to convert parallel data into serial  
data, and vice versa. The UART can handle serial data rates up to 3 Mbit/s.  
The SC16C750B is pin compatible with the TL16C750 and it will power-up to be  
functionally equivalent to the 16C450. Programming of control registers enables the  
added features of the SC16C750B. Some of these added features are the 64-byte receive  
and transmit FIFOs, automatic hardware flow control. The selectable auto-flow control  
feature significantly reduces software overload and increases system efficiency while in  
FIFO mode by automatically controlling serial data flow using RTS output and CTS input  
signals. The SC16C750B also provides DMA mode data transfers through FIFO trigger  
levels and the TXRDY and RXRDY signals. On-board status registers provide the user  
with error indications, operational status, and modem interface control. System interrupts  
may be tailored to meet user requirements. An internal loopback capability allows  
on-board diagnostics.  
The SC16C750B operates at 5 V, 3.3 V and 2.5 V, the industrial temperature range and is  
available in plastic PLCC44, LQFP64, and HVQFN32 packages.  
2. Features  
I Single channel  
I 5 V, 3.3 V and 2.5 V operation  
I 5 V tolerant on input only pins1  
I Industrial temperature range (40 °C to +85 °C)  
I After reset, all registers are identical to the typical 16C450 register set  
I Capable of running with all existing generic 16C450 software  
I Pin compatibility with the industry-standard ST16C450/550, TL16C450/550,  
PC16C450/550. Software compatible with SC16C750 and TL16C750  
I Up to 3 Mbit/s transmit/receive operation at 5 V, 2 Mbit/s at 3.3 V, and 1 Mbit/s at 2.5 V  
I 64-byte transmit FIFO  
I 64-byte receive FIFO with error flags  
I Programmable auto-RTS and auto-CTS  
N In auto-CTS mode, CTS controls transmitter  
N In auto-RTS mode, receive FIFO contents and threshold control RTS  
I Automatic hardware flow control  
I Software selectable baud rate generator  
1. For data bus pins D7 to D0, see Table 24 “Limiting values”.  

SC16C750BIBS,128 替代型号

型号 品牌 替代类型 描述 数据表
SC16C750BIBS,157 NXP

完全替代

SC16C750B - 5 V, 3.3 V and 2.5 V UART with 64-byte FIFOs QFN 32-Pin
SC16C750BIB64,151 NXP

类似代替

SC16C750B - 5 V, 3.3 V and 2.5 V UART with 64-byte FIFOs QFP 64-Pin

与SC16C750BIBS,128相关器件

型号 品牌 获取价格 描述 数据表
SC16C750BIBS,157 NXP

获取价格

SC16C750B - 5 V, 3.3 V and 2.5 V UART with 64-byte FIFOs QFN 32-Pin
SC16C750BIBS-F NXP

获取价格

IC,UART,CMOS,LLCC,32PIN,PLASTIC
SC16C750BIBS-S NXP

获取价格

5 V, 3.3 V and 2.5 V UART with 64-byte FIFOs - Channel: 1 ; Data transfer rate: 3 Mb/s; F&
SC16C750IA44 NXP

获取价格

Universal Asynchronous Receiver/Transmitter (UART) with 64-byte FIFO
SC16C750IA44 PHILIPS

获取价格

Serial I/O Controller, CMOS, PQCC44,
SC16C750IA44,512 NXP

获取价格

SC16C750IA44
SC16C750IA44,518 NXP

获取价格

SC16C750IA44
SC16C750IA44,529 NXP

获取价格

SC16C750IA44
SC16C750IB64 NXP

获取价格

Universal Asynchronous Receiver/Transmitter (UART) with 64-byte FIFO
SC16C750IB64 PHILIPS

获取价格

Serial I/O Controller, CMOS, PQFP64,