Bolt Style EMI Filters
SA Series – 4-40 Thread - Epoxy Sealed –
Circuits Available – C & L
APPLICATIONS
The SA series provides effective filtering
in the RF and MICROWAVE frequency
spectrums from 10 MHz through 26 GHz.
Designed for mounting in a tapped
bulkhead or with the standard nut and
lockwasher provided, it is ideal for high
impedance circuits where large capaci-
tance values are not practical. In the “L”
section version an internal ferrite bead
element provides both inductance and
series resistance (lossy characteristic)
which improves insertion loss and pro-
vides superior transient performance. The
SA series comes with a standard .020
diameter beryllium copper lead. Alternate
lead lengths, diameters of .016 or .026
and alternate materials in steel or half-
hard copper are available.
CHARACTERISTICS
• Meets or exceeds the applicable portions
of MIL-F-28861/6. See QPL listings.
• Features rugged monolithic discoidal
capacitor construction.
• Smallest screwbody filter available.
• Epoxy seal on both ends.
SPECIFICATIONS
STANDARD CONFIGURATION
1. Plating: Silver standard – Electro-tin or
gold available
A
.154
.159
.030
MAX.
.112-40 UNC-2A
(4-40)
2. Material:
Case: Cold rolled steel
.020 .002
(Std. - See Note 1)
Leads: Beryllium copper (steel or half/hard
copper leads available)
3. Operating Temperature Range:
-55°C to +125°C
.030
MAX.
A = .120 .005
(See Note 2)
.220
.010
4. Insulation Resistance:
At 25°C: 1,000 megohm-microfarad
min., or 100,000 megohms
min., whichever is less
.240
.020
.360
.020
At 125°C: 100 megohm-microfarad
min., or 10,000 megohms
min., whichever is less
CIRCUIT DIAGRAMS
5. Dielectric Withstanding Voltage (DWV):
R-level designs:
THRD
END
L2
C
2.0 times rated DC voltage
SA1
SA2 (See Note 3)
Class B, Class S designs:
2.5 times rated DC voltage
6. DC Resistance (DCR): .02 ohm,
maximum
Notes:
millimeters (inches)
0.05 (.002) 3.05 (.120)
0.13 (.005) 3.68 (.145)
0.25 (.010) 3.91 (.154)
0.41 (.016) 4.04 (.159)
0.51 (.020) 5.59 (.220)
0.66 (.026) 6.10 (.240)
0.76 (.030) 9.14 (.360)
1. Standard catalog designs
have .020" dia. lead. MIL-F-
28861/6 calls for .026" dia.
.026" dia. will not be supplied
unless specified.
3. All SA2 L-Section Filters have
inductor (bead) at threaded
end.
7. Dissipation Factor (DF): 3% maximum
8. Rated DC Current: 5 Amps, maximum
4. Metric equivalent dimensions
given for information only.
9. Recommended Mounting Torque:
32 oz-in. 4 oz-in.
2. “A” dimension of .120 .005
will satisfy M28861/6-003
requirement for .145
All “SA” series are supplied
A = .120 .005.
.030.
10. Supplied with mounting nut and lock-
washer - See Filter Design Guide Screw
and Locking Washer Table
2.84 (.112)
—
—
(See Note 4)
11. Insertion Loss for the “C” and “L” sections
are equivalent due to the saturation
characteristic of the ferrite bead element
at rated current. At lower currents the “L”
becomes much more effective.
19