I M A G E S E N S O R
CCD area image sensor
S7986-01, S7987-01
Back-thinned FT-CCD for low-light-level NTSC B/W TV application
The S7986-01 and S7987-01 are a family of FT-CCD area image sensors specifically designed for high speed operation. A high frame rate is
attained by employing a wide band width on-chip amplifier. In area scan operation, The S7986-01 and S7987-01 can be used as a high frame rate
camera, and 2/3-inch NTSC B/W TV correspondence. The S7986-01 and S7987-01 also feature low dark signal (MPP mode operation). The
S7986-01 and S7987-01 have an effective pixel size of 14 × 14 µm and is available in image areas of 9.212 (H) × 6.860 (V) mm.
One-stage peltier cooler is built into the package for thermoelectric cooling (S7987-01). At room temperature operation, the device can be cooled
down to -10 ˚C (typ.) without using any other cooling technique. In addition, since both the CCD chip and the peltier cooler are hermetically
sealed, no dry air is required, thus allowing easy handling.
Features
Applications
ꢀ High-speed on-chip amplifier
(14 MHz, 2/3-inch NTSC B/W TV correspondence)
ꢀ Greater than 90% quantum efficiency
ꢀ Wide spectrum range
ꢀ High-speed UV imaging
ꢀ Semiconductor inspection
ꢀ Microscope
ꢀ MPP operation
ꢀ Non-cooled types: S7986-01
One-stage TE-cooled types: S7987-01
(Two-stage TE-cooled types are optional)
ꢀꢀSelection and order guide
Number of
total pixels
Number of
active pixels
Active area
[mm (H) × mm (V)]
Type No.
Cooling
S7986-01
S7987-01
Non-cooled
One-stage TE-cooled
680 × 500
658 × 490
9.212 × 6.860
General ratings
ꢀꢀ
Parameter
Specification
CCD structure
Pixel size
Frame transfer (2/3-inch NTSC B/W TV correspondence)
14 (H) × 14 (V) µm
2-phase
Vertical clock phase
Horizontal clock phase
Output circuit
Package
2-phase
Two-stage MOSFET source follower
24-pin ceramic package
Sapphire
Window*1
*1: Temporary window type (ex. S7986-01N) is available upon request.
1