S79FL01GS
1 Gb (128 MB) Dual-Quad FL-S Flash SPI
Multi-I/O, 3.0 V
Features
• Density
- 1 Gbit (128 Mbytes)
• Serial peripheral interface (SPI)
- SPI clock polarity and phase modes 0 and 3
- Double data rate (DDR) option
- Extended addressing: 32-bit address
• READ commands
- Dual-Quad SPI Quad Read: 104 MHz clock rate (104 MB/s)
- Dual-Quad SPI Quad DDR Read: 80 MHz clock rate (160 MB/s)
- Normal, Fast, Quad, Quad DDR
- AutoBoot - power up or reset and execute a Normal or Quad read command automatically at a preselected
address
- Common flash interface (CFI) data for configuration information.
• Programming (3 Mbytes/s)
- 1024-byte page programming buffer
- Quad-input page programming (QPP) for slow clock systems
- Automatic error checking and correction (ECC) – internal hardware ECC with single bit error correction
• Erase (1 Mbyte/s)
- Uniform 512-kbyte sectors
- Extended addressing: 24- or 32-bit address options
• Cycling endurance
- 100,000 program-erase cycles, minimum
• Data retention
- 20 year data retention, minimum
• Security features
- Separate one time program (OTP) array of 2048 bytes
- Block protection:
• Status register bits to control protection against program or erase of a contiguous range of sectors
• Hardware and software control options
- Advanced sector protection (ASP)
• Individual sector protection controlled by boot code or password
• 65 nm MIRRORBIT™ technology with Eclipse architecture
• Core supply voltage: 2.7 V to 3.6 V
• Temperature range:
- Industrial (–40°C to +85°C)
- Industrial Plus (–40°C to +105°C)
- Automotive, AEC-Q100 grade 3 (–40°C to +85°C)
- Automotive, AEC-Q100 grade 2 (–40°C to +105°C)
Datasheet
www.infineon.com
Please read the Important Notice and Warnings at the end of this document
page 1
002-00466 Rev. *H
2022-07-19